Mueller Industries, Inc. D 06100P Copper Coil Tubing 3/8 in 100 ft Type ACR
Seamless copper coil tubing, 3/8 in outside diameter by 100 ft, rated to 787 psi at 200 °F for air-conditioning and refrigeration lines
- Product typeDrain Components
- Main materialCopper
- Seamless copper resists leaks in refrigeration lines
- 100 ft coil covers long runs without joints
- Soft temper bends easily around tight corners
- ASTM B280 grade meets AC/R pressure standards
- Rated 787 psi at 200 °F for reliable service
Copper Coil Tubing for Air Conditioning
This 100 ft copper coil tubing is designed for air conditioning and refrigeration installations. It meets ASTM B280 standards and uses UNS C12200 grade copper. The soft temper allows easy bending and shaping during fitting. Suitable for professional plumbers and HVAC technicians.
Thermal Performance and Pressure Rating
The tubing handles a maximum operating temperature of 400 Degrees F and a maximum operating pressure of 787 psi at 200 Degrees F. Seamless fabrication ensures consistent wall thickness of .032 in for reliable heat transfer. No coating or cleaning is applied, leaving the copper surface ready for brazing.
Sustained Load Behaviour
Under continuous high-temperature and high-pressure conditions the copper material maintains structural integrity up to the rated limits. The .25 in inside diameter supports steady refrigerant flow without deformation. Installers should verify system design pressures do not exceed 787 psi at elevated temperatures.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $192.99
- Pricier than about 84% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Mueller Industries |
| Model name | D 06100P |
| Product type | Drain Components |
| Size & build | |
| Main material | Copper |
Questions about this item
How do I flare the 3/8 in soft copper tubing and what step is often missed?
Cut the coil squarely, deburr the .25 in inside diameter, slide the flare nut on before flaring, then use a 3/8 in flaring tool; the missed step is forgetting the nut until after the flare is made.
What maintenance or replacement will this 100 ft copper coil need over time?
Inspect joints for green corrosion and verify the .032 in wall has not thinned from vibration or acidic condensate; replace any section that shows pitting or has exceeded the 787 psi @ 200 Degrees F rating.
What limit appears first when this Type ACR tubing runs continuously at high temperature?
The 400 Degrees F maximum operating temperature is reached before the 787 psi pressure ceiling, so sustained heat is the limiting factor.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC TC20200ST Check Valve Trap 2 in
- Drain Components
- HAWA
Watts RK957 backflow preventer repair kit 21
- Drain Components
- Transparent
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Red Hat 8030G017 120V AC Brass Solenoid Valve 1/2 in 15 psi 2.8 Cv
- Drain Components





