We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, 1 1/8 inch OD, 2 ft length

Mueller Industries, Inc.

Mueller Industries, Inc. KH10002 1 1/8 in OD 2 ft K Copper Trap

SKU CH-N2H6-96RB4 MPN KH10002

Straight copper tube, Type K, 2 ft length, 1 1/8 in outside diameter, seamless C12200 alloy, rated to 524 psi at 200 °F

  • Product typeDrain Components
  • Seamless copper construction ensures leak-free performance
  • Type K wall thickness withstands 524 psi at 200°F
  • Meets ASTM B88 and NSF/ANSI/CAN 61 standards for potable water
  • Hard-drawn C12200 copper resists corrosion up to 400°F
  • 2 ft straight length ready for custom fabrication

Product Identity

Mueller Industries KH10002 is a 2 ft length of Type K copper tubing with a 1 1/8 in outside diameter and 1 in inside diameter. It meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 standards for potable water applications. The seamless C12200 copper construction suits professional plumbers and qualified DIY installers.

Installation Notes

The hard temper and straight form require appropriate copper tube cutters and either soldering or compression fittings rated for 524 psi at 200 Degrees F. Clean and deburr ends thoroughly before joining to avoid leaks. Installers without brazing or soldering experience may find the rigid tubing difficult to manipulate in tight spaces.

Capacity and Limits

Rated for a maximum operating pressure of 524 psi at 200 Degrees F and a maximum temperature of 400 Degrees F, the tube handles typical residential and commercial hot and cold water lines. The 0.065 in wall thickness provides durability but the fixed 2 ft length limits straight runs without additional couplings. Unsuitable for gas lines or applications exceeding the stated pressure and temperature limits.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 59% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameMueller Industries
Model nameKH10002
Product typeDrain Components

Questions about this item

How can I verify the copper tubing meets potable-water standards after installation?

The tubing carries ASTM B88, NSF 372 and NSF/ANSI/CAN 61 markings, confirming compliance for potable water systems.

What comes with the KH10002 straight tubing and what must I supply myself?

The 2 ft length of 1 1/8 in OD Type K copper tube is supplied cleaned and capped; fittings, flux, solder and any insulation are not included.

Which copper tube type and wall thickness suit a 524 psi / 400 °F potable-water line?

Type K with 0.065 in wall thickness is rated for 524 psi at 200 °F and a maximum operating temperature of 400 °F.

More in Drain Stoppers, Strainers & Traps

Similar items