NASHUA 357 Duct Tape 48mm x 55m 13 mil Red hvac control
Red polyethylene-coated cloth duct tape, 48 mm wide by 55 m long and 13 mil thick, rated from 40 to 200 °F for general-purpose indoor and outdoor use
- Product colorRed
- Polyethylene coated cloth backing resists tearing
- Rubber adhesive bonds to metal and ductwork
- Withstands 40 to 200 °F service temperatures
- 48 mm wide by 55 m continuous roll
- Series 357 general purpose duct tape
HVAC duct tape for trade use
This NASHUA 357 duct tape is a general-purpose polyethylene coated cloth roll with rubber adhesive. It suits HVAC technicians, maintenance crews and metalworkers who need a reliable seal on ductwork, joints and sheet metal in workshop or site conditions.
Replaces worn or missing tape on ducts
The roll upgrades from lighter utility tapes when a 13 mil thickness and a 200 Degrees F maximum performance temperature are required. The jump is worth it for indoor and outdoor assemblies that see thermal cycling or need a continuous 60 yd length without splices.
Check surface and temperature range
Verify that the substrate is clean, dry and compatible with rubber adhesive before applying. Confirm the operating environment stays within the 40 to 200 Degrees F performance window so the bond holds through seasonal swings.
How it compares
Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 90% of the 1,762 comparable items (median $45.99).
Specifications
| Product | |
|---|---|
| Brand name | NASHUA |
| Product color | Red |
Questions about this item
What width and length roll does the 48 mm by 55 m tape come in?
The roll is 48 mm wide and 55 metres long, which is also listed as 1 7/8 inches by 60 yards.
How do I apply the polyethylene coated cloth tape so the rubber adhesive bonds properly?
Clean the surface, press the tape firmly along its full length to activate the rubber adhesive, and avoid stretching the backing during application.
When should I replace the tape if it is used at temperatures between 40 and 200 degrees F?
Replace the tape when the backing shows cracking, the adhesive loses tack, or the polyethylene coating peels after prolonged exposure within the 40 to 200 °F range.
More in Heating & Cooling Controllers
Similar items
SHURTAPE TECHNOLOGIES, INC. PC 618 Duct Tape 48mm x 55m 10 mil Silver hvac control
- Silver





