We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80mm case fan with center hub and mounting holes

NDLIULEI

NDLIULEI JF0825S1M-R 12V 0.15A 80x80x25mm case fan

SKU CH-VSB9-ZCQGR MPN JF0825S1M-R

An 80×80×25 mm case fan running at 12 V and 0.15 A for compact cooling

  • Product typeCase Fan
  • 12 V operation keeps power draw low at 0.15 A
  • 80 × 80 × 25 mm footprint fits standard 80 mm mounts
  • 1 inch square frame matches common chassis cut-outs
  • 9 inch depth leaves room for cable routing
  • New condition ensures full service life from first spin

12V 80mm Case Fan Overview

This NDLIULEI JF0825S1M-R is a 12V DC case fan measuring 80 by 80 by 25 millimetres. It draws 0.15 amps and fits standard 8025 mounting points. The unit is supplied new for system cooling duties.

Who This Suits

Builders replacing an 80mm fan in a compact chassis or legacy system will find the correct voltage and frame depth here. Buyers needing higher airflow, PWM control or larger frame sizes should look at other models.

Deciding Specification

The 12V 0.15A rating determines compatibility with your motherboard header or fan controller. Verify that your header supplies 12 volts and can deliver at least 0.15 amps before ordering.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $25.99
Pricier than about 65% of the 8,339 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeCase Fan

Questions about this item

How do I mount the JF0825S1M-R fan in an 80 mm case opening?

Align the four 80 mm screw holes with the chassis mounts, insert the screws through the fan frame, and tighten evenly; the step often missed is checking that the 12 V connector reaches the motherboard header before final tightening.

When should I replace the JF0825S1M-R fan?

Plan to replace it when bearing noise increases noticeably or airflow drops, typically after several years of continuous 12 V, 0.15 A operation.

What is the first limit reached during sustained 12 V use?

The 0.15 A current draw and 25 mm frame thickness limit sustained airflow, so temperature rise in tight enclosures becomes the limiting factor first.

More in PC Cooling Fans

Similar items