Nemesis
Nemesis NA-FR1800X5D 200Wx4 5-Channel Class-D Car Amplifier
Five-channel Class-D amplifier delivering 200W RMS per front channel plus 1,000W RMS for subwoofer at 1 ohm
- Product typeAmplifiers
- 200 W × 4 channels plus 1,000 W subwoofer channel drives full system
- Class-D efficiency delivers high power with smart fan cooling
- 10 Hz – 20 kHz response covers full audible range
- 100 dB signal-to-noise ratio keeps music clean at any volume
- Adjustable 15 Hz – 1 kHz high-pass and 80 Hz low-pass filters tune each speaker
Five-channel power
The Nemesis NA-FR1800X5D is a Class-D car amplifier that delivers 200W x 4 plus 1,000W RMS at 1-ohm for a complete system in one chassis. It suits owners who want front, rear and subwoofer channels without stacking multiple amps.
Replacing a multi-amp stack
A single five-channel unit removes the wiring and space penalties of running a separate four-channel amp and a mono block. The jump is worth it when your install has limited room and you need full-range power plus dedicated bass authority from one supply voltage.
Headroom across impedances
At 1-ohm the four main channels hold 200W each while the sub channel reaches 1,000W; at 2-ohm they drop to 130W and 750W, and at 4-ohm to 75W and 450W. The smart cooling fan engages on temperature or audio signal to sustain output, but the 16V maximum supply voltage sets a hard ceiling for high-impedance loads.
How it compares
Measured against everything we stock in Car Audio Amplifiers, at today’s prices. Recalculated every night.
- Price $356.99
- Pricier than about 68% of the 158 comparable items (median $225.49).
Specifications
| Product | |
|---|---|
| Product type | Amplifiers |
Questions about this item
What power and ground cable gauge does the NA-FR1800X5D require for a safe 14.4 V installation?
Use 4 AWG power and ground cables with a fuse near the battery rated for the amplifier's total current draw at 14.4 V.
Which wiring step is most often missed when connecting the five channels and the remote turn-on lead?
Connect the remote turn-on wire so the smart cooling fan activates with the audio signal; otherwise the amp stays in standby and produces no output.
What ongoing maintenance does the smart cooling fan need to keep the amplifier running at 16 V max supply?
Periodically vacuum dust from the fan intake and verify the blades spin freely; a blocked fan triggers thermal protection and shuts the amp down.
More in Car Audio Amplifiers
Similar items
Wet Sounds Front Battery 4 Amplifier Power Kit car amplifier
- Amplifiers
Kenwood XR601-1 Excelon 600-Watt Mono Car Amplifier
- Class D
- 4 Channels





