We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB (6x256GB) DDR4-2933 ECC RDIMM 8Rx4 1.2V 288-Pin

SKU CH-1WNR-M6XZ7

A 1.5 TB registered DDR4 kit with six 256 GB ECC modules running at 2933 MHz and 1.2 V

  • Total capacity1.5 TB (6 × 256 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latency21
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • 5 TB total capacity from six 256 GB modules
  • DDR4-2933 speed rated at PC4-23400
  • ECC registered design detects and corrects data errors
  • 8Rx4 organisation with 1.2 V operating voltage
  • CAS latency 21 for responsive server workloads

Server Memory Kit 1.5TB Capacity

This NEMIX RAM kit provides 1.5TB of DDR4 server memory across six 256GB registered DIMMs. It is built for enterprise platforms that require ECC error correction and registered signal buffering at the DDR4 2933 standard. The modules operate at 1.2V with a CAS latency of 21. This product is not for desktop PCs or consumer motherboards lacking registered DIMM support.

Thermals Noise and Power Draw

Each module runs at the standard 1.2V DDR4 voltage, keeping power draw consistent with the DDR4 2933 specification. Registered buffering and ECC logic add minimal overhead during typical server workloads. Passive cooling via system airflow is sufficient for normal operation. No active cooling components are included or required by the kit design.

Sustained Load Behaviour

Under continuous heavy memory utilisation the 8Rx4 organisation maintains signal integrity through the registered interface. ECC corrects single-bit errors and detects multi-bit errors without halting the system. The DDR4 2933 speed rating is sustained across all six modules in supported server platforms. Stability depends on motherboard qualification and proper population rules.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $8,035.99
Pricier than about 91% of the 6,523 comparable items (median $188.99).
Total capacity 1.5 TB (6 × 256 GB)
Higher than about 94% of the 6,064 comparable items (median 32 GB).
CAS latency 21
Lower than about 90% of the 439 comparable items (median 40).
Price per GB $5.36 per GB
Cheaper than about 70% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Model namePart#: MR23400-2584K6-SM-SYS-5019P-M
Part numberPart#: MR23400-2584K6-SM-SYS-5019P-M
Total capacity1.5 TB (6 × 256 GB)
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latency21
ECC supportYes
Buffer typeRegistered
Memory rank8Rx4
Power
Rated voltage1.2 V

Questions about this item

How do I install the six 256GB DDR4 RDIMMs and what step is often missed?

Power down the server, open the chassis, align each 288-pin module with the DDR4 slot key, press firmly until the ejector tabs click, then confirm all six are recognised in BIOS before closing the case.

What maintenance or replacement will the ECC RDIMM kit need over time?

The modules have no moving parts; dust the slots annually with compressed air, and replace any stick that begins reporting correctable ECC errors in the system event log.

What limit appears first when the 1.5TB kit runs sustained workloads at 2933MT/s?

The 1.2V DDR4 modules will hit thermal throttling or the platform's maximum registered DIMM capacity before the 21-cycle CAS latency becomes a bottleneck.

More in ECC Server RAM

Similar items