We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 server memory sticks, black chips, gold contacts

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 2933 ECC RDIMM 2Rx8 1.2V

SKU CH-E20C-C4H1W

A 192 GB DDR4 server memory kit of six 32 GB registered ECC modules running at 2933 MHz with CL21 latency and 1.2 V operation

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latency21
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • 192 GB capacity across six 32 GB modules for large server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation maximises density per DIMM
  • 2 V operation reduces power draw in dense configurations

Server memory kit for registered DDR4 systems

This NEMIX RAM kit provides 192 GB of DDR4 memory across six 32 GB modules. It is built for servers that require registered ECC RDIMMs running at 2933 MT/s. Desktop or workstation boards that accept only unbuffered DIMMs cannot use this kit.

Registered DDR4 2933 with ECC limits

The modules operate at PC4-23400 speed with CAS latency 21 and 1.2 V. Registered buffering adds a clock cycle, so the memory controller must support RDIMMs. ECC corrects single-bit errors but the platform must enable the feature in firmware for it to function.

288-pin RDIMM build with major OEM chips

Each stick uses 2Rx8 organisation and chips sourced from Samsung, Micron or Hynix. The 288-pin form factor fits standard DDR4 RDIMM slots. Registered design increases electrical load on the memory bus, so population rules for the target server should be checked before installation.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $1,588.99
Pricier than about 84% of the 6,523 comparable items (median $188.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 90% of the 6,064 comparable items (median 32 GB).
CAS latency 21
Lower than about 90% of the 439 comparable items (median 40).
Price per GB $8.28 per GB
Pricier than about 59% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Model namePart#: MR23400-328K6-SM-SYS-5019P-M
Part numberPart#: MR23400-328K6-SM-SYS-5019P-M
Total capacity192 GB (6 × 32 GB)
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latency21
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Power
Rated voltage1.2 V

Questions about this item

Should I choose the 6 x 32 GB kit or a smaller capacity?

The kit provides 192 GB total across six 32 GB modules, so choose it when the server board has six slots and needs the full capacity; otherwise a smaller kit leaves room for future expansion.

What does the 2933 MHz speed mean once installed?

The modules run at DDR4 2933 (PC4-23400) with CAS latency 21, delivering that data rate when the platform supports it; actual throughput depends on the CPU memory controller and BIOS settings.

Does the 288-pin RDIMM interface limit anything in practice?

The 288-pin registered ECC RDIMM form factor fits DDR4 server slots only; it will not work in desktop or laptop boards, and the registered buffer adds one cycle of latency versus unbuffered DIMMs.

More in ECC Server RAM

Similar items