NEMIX RAM DDR4 ECC RDIMM 256GB (8x32GB) 2133 CL15 1.2V 288-pin server RAM
- 256 GB (8 × 32 GB)
- 288-Pin DDR4 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eight unbuffered DDR4 ECC UDIMMs deliver 256 GB at 2666 MHz with CL19 latency and 1.2 V operation
Capacity 256GB (8 x 32GB)
This 256GB kit contains eight 32GB DDR4 2666 ECC UDIMM modules rated at PC4-21300 with CL19 latency. It runs at 1.2V on a 288-pin interface and uses 2Rx8 organisation with chips from major OEM suppliers. The kit targets servers and workstations that require error-correcting memory for data integrity.
The modules are unbuffered ECC UDIMMs, so they need a motherboard and CPU that explicitly support unbuffered ECC operation. Systems that require registered or load-reduced DIMMs cannot use this kit. Builders needing higher speeds, lower latency or non-ECC memory should look at other configurations.
Installation follows standard UDIMM procedure: power down, open the chassis, align the notch with the slot key and press until the latches click. Common issues arise when the platform does not support unbuffered ECC or when the BIOS is not configured to enable ECC, causing the system to ignore the modules or fail to boot.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Memory |
| Model name | DDR4 ECC Unbuffered UDIMM Memory |
| Part number | ME21300-328K8 |
| Total capacity | 256 GB (8 × 32 GB) |
| Product type | 288-Pin DDR4 ECC UDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Other versions of this model
Yes — the kit uses 288-pin DDR4 ECC unbuffered UDIMM modules, so the board must provide DDR4 slots that accept ECC unbuffered memory.
If the board supports the combined capacity and rank count, mixing same-speed CL19 2Rx8 modules usually works; verify the motherboard’s maximum DIMM population and rank limits first.
Check the BIOS memory information or an OS tool such as dmidecode — it should report 2666 MT/s, CL19 timings, 1.20 V and ECC enabled for each 32 GB module.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?