We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 ECC UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 32GB (2 x 16GB) DDR4 2400MHz ECC UDIMM server RAM

SKU CH-DE6Y-EYCYJ

32 GB dual-channel kit of DDR4 ECC UDIMMs running at 2400 MHz with CL17 latency and 1.2 V operation

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latency17
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • ECC protection guards data integrity in server workloads
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 2400 MHz PC4-19200 delivers rated throughput
  • CAS 17 at 1.2 V balances latency and power
  • 288-pin unbuffered UDIMM fits compatible server boards

Kit composition and target systems

This kit provides 32 GB of DDR4 server memory in a matched pair of 16 GB ECC UDIMM modules. It is built for workstations and entry-level servers that require error-correcting unbuffered DIMMs running at 2400 MHz. Buyers who need registered or load-reduced DIMMs cannot use this kit.

Installation notes

Each module uses the standard 288-pin DDR4 UDIMM form factor and operates at 1.2 V, so it fits any compatible DDR4 UDIMM slot without extra power cables. The 2Rx8 organisation means the memory controller must support dual-rank unbuffered ECC; systems limited to single-rank or non-ECC UDIMMs will not post with these modules installed.

Deciding specification

The defining attribute is the combination of ECC and unbuffered operation at DDR4-2400 with a CAS latency of 17. If your platform specifically calls for ECC UDIMMs at this speed and rank configuration, the kit matches; otherwise a different module type is required.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $269.99
Pricier than about 58% of the 6,523 comparable items (median $188.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 6,064 items is 32 GB.
CAS latency 17
Lower than about 92% of the 439 comparable items (median 40).
Price per GB $8.44 per GB
Pricier than about 60% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Model namePart#: ME19200-628K2-SM-SYS-5019S-ML
Part numberPart#: ME19200-628K2-SM-SYS-5019S-ML
Total capacity32 GB (2 × 16 GB)
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latency17
ECC supportYes
Buffer typeUnbuffered
Memory rank2Rx8
Power
Rated voltage1.2 V

Questions about this item

How can I verify the kit is running at DDR4 2400 with CL17 after installation?

Check the BIOS memory info or a tool such as CPU-Z; it should show 2400 MT/s, CAS 17, 1.2 V and ECC enabled for both 16 GB modules.

What ships in the box and what must I source separately?

The box contains two 16 GB DDR4 2400 ECC UDIMM modules; no extra cables, brackets or software are included or required.

Should I choose the 2Rx8 32 GB kit or a different capacity for my DDR4 2400 server?

This 32 GB (2 x 16 GB) 2Rx8 kit matches the DDR4 2400 PC4-19200 spec; select it when your board takes unbuffered ECC UDIMMs and you need 32 GB total.

More in ECC Server RAM

Similar items