We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933 desktop RAM

SKU CH-NPZ8-JMRCK

A 32 GB desktop DDR4 kit of four 8 GB unbuffered UDIMMs running at 2933 MHz with CL21 latency at 1.2 V

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Rated voltage1.2 V
  • Buffer typeUnbuffered

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity from four 8 GB modules
  • 2933 MHz DDR4 speed rated at PC4-23400
  • CL21 CAS latency for responsive timing
  • 20 V low-voltage operation reduces power draw
  • 288-pin UDIMM fits standard desktop motherboards

32GB DDR4 kit for desktop upgrades

This NEMIX RAM kit supplies 32GB across four 8GB modules built to the DDR4 2933 standard. It targets users who need a straightforward capacity increase for everyday workloads or light content creation. The unbuffered, non-ECC design matches typical consumer motherboards. Installation follows the usual UDIMM procedure without special tools.

CL21 timing and 1.20V operation

Each module runs at CL21 latency with a 1.20V supply, matching the PC4-23400 data rate. The conservative timing and standard voltage help stability on a wide range of platforms. No heat spreaders or LEDs are fitted, keeping the profile low for tight slots. The kit ships as a matched set to simplify population order.

288-pin UDIMM format and major-brand ICs

The 288-pin UDIMM form factor fits current desktop DIMM sockets without adapters. Chips are sourced from major OEM suppliers such as Samsung, Micron or Hynix and are stress tested under load before packing. The plain green PCB and lack of tall spreaders avoid clearance issues with larger CPU coolers. Modules are unbuffered and non-ECC, so they suit standard consumer chipsets.

How it compares

Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.

Price $207.99
Pricier than about 69% of the 3,647 comparable items (median $90.99).
Total capacity 32 GB (4 × 8 GB)
Higher than about 70% of the 3,251 comparable items (median 16 GB).
Price per GB $6.50 per GB
Typical for this category: the median of 3,251 items is $6.75 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
Model nameOriginal Series DDR4 Desktop PC Memory Solutions
Part numberMD23400-818K4
Total capacity32 GB (4 × 8 GB)
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage1.2 V
More details
LED lightingNone

Other versions of this model

3 more in the same range

Questions about this item

Will this 32GB kit work in a motherboard that only supports 288-pin DDR4 UDIMM slots?

Yes, the kit uses 288-pin DDR4 UDIMM modules that fit standard desktop DDR4 slots.

Do I need to enable XMP or manually set 2933 MT/s in the BIOS to reach the rated speed?

The modules are rated at 2933 MT/s with CL21 at 1.20 V; most boards will apply this profile automatically or with a single BIOS setting.

Can I mix these 1Rx8 modules with existing 2Rx8 sticks in the same system?

Mixing ranks is possible but not guaranteed; for best stability use identical 1Rx8 modules in all populated slots.

More in Desktop RAM

Similar items