NEMIX RAM 8GB DDR4 2666MHz ECC UDIMM 1Rx8 1.2V 288-PIN
ECC UDIMM module adds 8 GB of DDR4 memory at 2666 MHz with CAS 19 latency
- Rated speedDDR4 2666 (PC4 21300)
- ChipsetMajor OEM Samsung, Micron, Hynix
- CAS latency19
- Rated voltage1.2 V
- Buffer typeUnbuffered
- Memory rank1Rx8
- ECC protection detects and corrects single-bit errors
- 2666 MHz DDR4 speed delivers PC4-21300 bandwidth
- Low 1.2 V operation reduces power draw
- Unbuffered 288-pin UDIMM fits standard server slots
- Single-rank 1Rx8 layout built with major OEM chips
8 GB DDR4 2666 ECC UDIMM for servers
This 8 GB DDR4 2666 ECC UDIMM module targets servers and workstations that require error-correcting memory. The unbuffered design suits platforms that accept UDIMM rather than registered DIMMs. It operates at 1.2 V with a CAS latency of 19.
288-pin UDIMM form factor and single-rank layout
The 288-pin UDIMM connector fits standard DDR4 server slots without adapters. A single-rank 1Rx8 organisation keeps the electrical load light on the memory controller. Major OEM chips from Samsung, Micron or Hynix are used depending on supply.
Low-voltage operation and standard JEDEC timing
At 1.2 V the module follows standard DDR4 power specifications for reduced heat output. The PC4-21300 rating and CL19 timing run at JEDEC speeds without overclocking. Passive cooling in typical server airflow is sufficient for normal operation.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $48.99
- Cheaper than about 84% of the 6,523 comparable items (median $188.99).
- CAS latency 19
- Lower than about 91% of the 439 comparable items (median 40).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Model name | Part#: ME21300-818K1-SM-SYS-5019C-M |
| Part number | Part#: ME21300-818K1-SM-SYS-5019C-M |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | 19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
Does this DDR4 2666MHz PC4-21300 module run at the rated speed on a standard server board?
It operates at DDR4 2666MHz with CAS latency 19 and 1.2V, so the board must support PC4-21300 speeds to reach that rate.
Will the 288-pin 1Rx8 UDIMM fit in a typical 1U server slot?
The unbuffered 288-pin DIMM is a standard UDIMM height; verify your chassis clearance and slot keying before installing.
What is the correct way to seat this ECC UDIMM, and what step is often missed?
Align the notch with the slot key, press evenly until both retention clips click, then confirm the module is fully latched — partial seating causes boot failures.
More in ECC Server RAM
Similar items
Accortec, Inc ACCG74996304/1 8 GB DDR4 2400 MHz SoDIMM server RAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Gigaram 64GB (4x16GB) DDR3-1600 PC3-12800 CL11 2Rx8 1.35V ECC SODIMM server RAM
- 64 GB (4 × 16 GB)
- 204-Pin DDR3 SO-DIMM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks 8GB DDR4 2133MHz CL15 1.2V ECC Registered 2Rx8 Server RAM
- 8 GB
- DDR4 2133





