We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz CL21 desktop RAM

SKU CH-N7MR-DD8GV

Adds 8 GB of DDR4 2933 MHz CL21 non-ECC UDIMM memory at 1.2 V using 288-pin modules built with major-brand chips

  • Total capacity8 GB
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • 8GB capacity expands system memory for smoother multitasking
  • DDR4 2933MHz speed moves data quickly between CPU and RAM
  • CL21 latency keeps response times tight for everyday workloads
  • 2V operation reduces power draw and heat output
  • 288-pin UDIMM fits standard desktop DDR4 slots

8GB DDR4 2933MHz Desktop Module

This NEMIX RAM module provides 8GB of DDR4 memory at 2933MHz with a CL21 latency. It uses a standard 288-pin UDIMM form factor and operates at 1.20V. The kit is a single 1Rx8 rank stick built with major OEM chips from Samsung, Micron or Hynix. It carries no heat spreader and includes no lighting.

Suits standard desktop upgrades.

This unbuffered non-ECC DIMM fits typical consumer motherboards that accept DDR4 2933MHz memory. It is compatible with the Dell part SNPJ69DFC/8G and similar platforms. Systems requiring registered, fully buffered or ECC memory cannot use this module. Buyers needing error correction or server-grade registration should select a different product.

288-pin DDR4 UDIMM interface decides fit

The module uses the 288-pin DDR4 UDIMM interface, which is the sole physical and electrical key for motherboard compatibility. Verify that the target board supports DDR4 UDIMM at 2933MHz and non-ECC unbuffered operation before purchase. No other specification overrides this requirement.

How it compares

Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.

Price $50.99
Cheaper than about 65% of the 3,647 comparable items (median $90.99).
Total capacity 8 GB
Lower than about 60% of the 3,251 comparable items (median 16 GB).
Price per GB $6.37 per GB
Cheaper than about 54% of the 3,251 comparable items (median $6.75 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
Model nameOriginal Series DDR4 Desktop PC Memory Solutions
Part numberMD23400-818K1
Total capacity8 GB
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage1.2 V
More details
LED lightingNone

Questions about this item

Is the single 8GB module the right choice or should I look for a different capacity?

This listing is a single 8GB DDR4 2933MHz CL21 UDIMM; if your board has free slots you can add another identical stick later, but the product itself is only the one 8GB module.

What does the 2933MHz rating mean once the stick is installed in my desktop?

The module runs at 2933 MT/s (PC4-23400) with CL21 latency at 1.2V; actual throughput depends on your motherboard's memory controller and whether it supports that speed natively or down-clocks it.

Does the 288-pin DDR4 interface limit the speed or capacity I can use?

The 288-pin DDR4 UDIMM form factor fits standard desktop slots; the stick itself is rated 2933MHz CL21, so the interface does not impose a lower cap — your platform's memory controller determines the final operating speed.

More in Desktop RAM

Similar items