We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 4800 PC5-38400 CL40 1.1V 1Rx6 262-pin Non-ECC SODIMM server RAM

SKU CH-7TJY-3E44C

An 8 GB DDR5 SODIMM running at 4800 MT/s with CL40 latency and 1.1 V operation for compact server and laptop upgrades

  • Total capacity8 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latency40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered
  • 8GB capacity expands server memory headroom for multitasking workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • CL40 latency supports responsive performance in compatible platforms
  • 1V operation reduces power draw in dense memory configurations
  • 262-pin SODIMM form factor fits small form factor server slots

DDR5 4800 SODIMM for SFF systems

This NEMIX RAM module delivers 8 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It operates at 1.1 V with CL40 latency and uses a 1Rx6 unbuffered non-ECC design. The stick is built for small-form-factor PCs and compatible server platforms that accept this specification.

Suits DDR5 4800 slots needing a single 8 GB stick

Builders upgrading a laptop or SFF workstation with an open SODIMM slot at this speed will find it a direct fit. Systems that require ECC, registered modules, a different voltage, or a higher capacity per module should look at other parts.

1Rx6 unbuffered non-ECC at 1.1 V

The rank configuration, buffering type, ECC status and voltage together determine whether the platform will POST and run stably. Verify the motherboard or laptop manual for DDR5 4800 SODIMM support with these exact electrical and organisation parameters before purchase.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $85.99
Cheaper than about 73% of the 6,523 comparable items (median $188.99).
Total capacity 8 GB
Lower than about 80% of the 6,064 comparable items (median 32 GB).
CAS latency 40
Typical for this category: the median of 439 items is 40.
Price per GB $10.75 per GB
Pricier than about 70% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Model namePart#: MS38400-816K1-DR580L-IL03-SO48-V27
Part numberPart#: MS38400-816K1-DR580L-IL03-SO48-V27
Total capacity8 GB
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latency40
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx6
Power
Rated voltage1.1 V

Questions about this item

Will the 262-pin SODIMM fit a Supermicro MEMDR580LIL03SO48 slot?

The module uses a 262-pin SODIMM form factor and is listed as compatible with the Supermicro MEMDR580LIL03SO48, so it will seat in that slot.

What is the correct orientation for inserting the notch on this DDR5 SODIMM?

Align the single notch on the module with the key in the slot, press down firmly until both side clips click, and verify the gold contacts are fully seated.

When should the 8GB DDR5 4800 module be replaced?

Replace it if memory diagnostics report uncorrectable errors, the system fails to POST with this module installed, or capacity no longer meets workload demands.

More in ECC Server RAM

Similar items