We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal network switch with ten RJ45 ports and one SFP slot

NETGEAR ProSafe TEG1110PF-8-120W 10 Port Gigabit PoE+ Switch

SKU CH-05TQ-A0MDQ

A 10-port unmanaged switch with eight PoE+ ports delivering up to 30W each and a 120W total budget, plus one Gigabit RJ45 and one SFP uplink, VLAN isolation, and an extend mode reaching 250 metres

  • Product formatDesktop
  • Supported standardsPassive PoE
  • Network cablingRJ45,SFP,PoE
  • Management typeUnmanaged
  • Uplink ports8
  • Uplink portsRJ45
  • 120W total PoE budget powers up to eight devices
  • 30W per port maximum supports WiFi 6 access points and HD cameras
  • 250m Extend Mode reaches distant IP cameras at 10Mbps
  • VLAN isolation on ports 1-8 blocks broadcast storms and DHCP spoofing
  • SFP and RJ45 uplinks enable fibre or copper long-range links

ProSafe 10-port PoE+ switch

The NETGEAR ProSafe TEG1110PF-8-120W is a 10-port Gigabit switch with eight PoE+ ports delivering up to 30 W each and a 120 W total power budget. It is built for installers deploying IP cameras, VoIP phones or WiFi 6 access points without separate power supplies. Unmanaged operation means no configuration is required.

Silent metal chassis with Extend Mode

The sturdy metal housing runs fanless so the switch adds no audible noise to an office or equipment closet. In Extend Mode the PoE+ ports push data and power up to 250 m, with speeds dropping to 10 Mbps beyond 100 m. Jumbo frame support to 9216 bytes and a 768 KB buffer handle bursty surveillance traffic without extra cooling.

Desktop or wall mount with dual uplink

The compact desktop format includes wall-mount brackets for flexible placement in cabinets or on walls. One Gigabit RJ45 uplink and one SFP uplink give fibre or copper backhaul options without cascading switches. VLAN mode isolates ports 1–8 from each other while keeping uplink communication, limiting broadcast storms and DHCP spoofing on surveillance networks.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $62.99
Cheaper than about 86% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameNETGEAR
Product lineProSafe
Part numberTEG1110PF-8-120 W
Performance
Forwarding rate1000 Gbit/s
Memory
Buffer size768 KB
Connectivity
Supported standardsPassive PoE
Network cablingRJ45,SFP,PoE
Management typeUnmanaged
Uplink connection10/100 Mbit/s
Main port speed10/100 Mbit/s + 1,000 Mbit/s
Management accessRJ45,SFP,PoE
Jumbo frame support9216 bytes
SNMP supportNo
Layer support1
Ports & slots
Uplink ports8
Main ports10
Main port typeRJ45,SFP,PoE
Power
Power over EthernetNo
Size & build
Product dimensions14.33 in W × 12.83 in H × 9.06 in D
In the box
In the boxPower Adapter
More details
Product formatDesktop

Questions about this item

How do I mount the TEG1110PF-8-120W and connect the 8 PoE+ ports so the 120W budget is not exceeded?

Fix the metal chassis to a wall or desk, plug each IP camera or VoIP phone into ports 1–8 using Cat5e or better cable, and keep the combined draw of all powered devices at or below 120W; the switch itself needs no software setup.

What ongoing upkeep does the 10-port PoE+ switch require?

No fan or replaceable modules are present; periodically dust the ventilation slots, verify that the total PoE load stays under 120W, and replace any patch cable that shows wear.

At what point does the 250 m Extend Mode distance limit affect camera performance?

Beyond 100 m the link drops to 10 Mbps, so bandwidth-heavy HD streams may stutter even though power still reaches 250 m.

More in Ethernet & PoE Switches

Similar items