We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing adapter, 1 inch cup to 1-1/4 inch FNPT, wrot copper finish

Nibco, Inc.

Nibco, Inc. 603R Reducing Adapter 1" C x 1-1/4" FNPT Copper

SKU CH-1JHD-J0WER

Copper reducing adapter joins 1 in tube to 1-1/4 in FNPT for air, gas and potable water at 351 psi

  • Reduces 1-1/4" FNPT to 1" copper tube for secure transitions
  • Wrot copper construction resists corrosion in potable water and gas lines
  • Rated 351 psi at 200 °F for high-pressure reliability
  • Withstands temperatures up to 400 °F in demanding installations
  • Sweat cup connection ensures leak-free joints on 1" copper tubing

Reducing Adapter for 1" C to 1-1/4" FNPT

This wrought copper reducing adapter connects a 1 inch nominal copper tube to a 1-1/4 inch FNPT threaded fitting. It is designed for use with air, gases and potable water systems. The sweat connection on the tube side provides a permanent soldered joint for leak-free performance in plumbing installations.

Sweat connection and FNPT threads

The copper tube side uses a sweat fitting that requires soldering during installation, creating a secure permanent bond. The opposite end features female national pipe threads that accept standard male threaded components without additional adapters. Wrought copper construction resists corrosion and handles the specified pressure and temperature ratings for the listed applications.

Verify tube size and thread compatibility

Confirm that your existing copper tubing has a 1 inch nominal size with a 1-1/8 inch outer diameter to match the sweat end. Ensure the mating component uses a 1-1/4 inch male NPT thread for the FNPT side. Check that system operating pressure stays below 351 psi at 200 degrees F and temperature remains under 400 degrees F for safe operation.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $18.99
Typical for this category: the median of 2,955 items is $17.99.

Specifications

Product
Brand nameNibco

Questions about this item

Will the sweat joint on the 1 in copper tube side need re-soldering over time?

A properly soldered cup joint on the 1 in copper tube side is permanent and does not require re-soldering unless the joint was initially defective or the pipe is damaged.

What pressure limit applies first when the adapter runs continuously at 200 Degrees F?

The maximum operating pressure is 351 psi at 200 Degrees F, so that pressure ceiling is the first limit reached under sustained use at that temperature.

Does the copper body get hot enough to burn skin when carrying 200 Degrees F water all day?

Yes, the wrot copper body will reach the fluid temperature of 200 Degrees F, which is well above the threshold for contact burns, so insulation or guarding is advisable.

More in Hose Fittings, Adapters & Clamps

Similar items