We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat connections, two large and one smaller branch

Nibco, Inc.

Nibco, Inc. 611R 3x3x1-1/4 Copper Reducing Tee

SKU CH-VB54-ACTF8 MPN 611R

A sweat-fitting reducing tee joins two 3-inch copper lines to a 1-1/4-inch branch for potable-water systems

  • Product typeDrain Components
  • Reducing tee joins 3" and 1-1/4" copper lines
  • Wrot copper construction resists corrosion in potable water
  • Sweat connections create permanent leak-free joints
  • Three cup ends simplify branch installations
  • Lead-free material meets drinking water standards

Reducing Tee for Copper Pipework

This NIBCO 611R reducing tee joins three copper tubes in a sweat fitting configuration. The branch reduces from a 3 inch main run to a 1 1/4 inch outlet. All three connections use cup ends for soldering. The body is made from wrot copper for potable water applications.

Sweat Connection Changes Installation Method

The cup connections on every port require soldering rather than threading or pressing. This means the installer must clean, flux and heat each joint to form a permanent seal. No additional gaskets, rings or mechanical fasteners are supplied or needed for the joint itself.

Suits Plumbers Running 3 Inch Mains

It fits systems where a 3 inch copper line needs a 1 1/4 inch take-off. Installers who need press-fit, push-fit or threaded connections should look at other fitting types. Anyone working with tube sizes outside the stated dimensions cannot use this tee.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $49.99
Pricier than about 62% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameNibco
Model name611R 3 × 3 × 11/4
Product typeDrain Components

Questions about this item

Will the sweat joints on this reducing tee need re-soldering later?

Properly soldered copper sweat joints are permanent and do not require re-soldering under normal conditions.

What pressure limit appears first during continuous potable water flow?

The fitting follows standard copper tube pressure ratings; the system design determines the limiting pressure.

Does the copper body get hot or make noise when water runs all day?

Copper conducts heat so the tee will match water temperature; it produces no mechanical noise.

More in Drain Stoppers, Strainers & Traps

Similar items