We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup ends, bright metallic finish

Nibco, Inc.

Nibco, Inc. 611RR 1-1/2 x 1/2 x 1-1/2 Copper Reducing Tee

SKU CH-M6PH-HK9YM

Copper reducing tee connects 1-1/2 in and 1/2 in tubes for potable water systems

  • Reducing tee connects 1-1/2 in and 1/2 in copper lines
  • Wrot copper construction resists corrosion in potable water systems
  • Sweat cup connections on all three outlets for secure solder joints
  • Lead-free alloy meets safe drinking water standards
  • Compact reducing design simplifies branch installations in tight spaces

Reducing Tee for Copper Pipe

This NIBCO 611RR fitting joins three copper tubes in a tee configuration with sweat connections. The run ports accept 1-1/2 inch tube while the branch port accepts 1/2 inch tube. It is made from wrot copper for potable water systems.

Suited for Sweat Copper Reductions

Plumbers reducing a 1-1/2 inch line to a 1/2 inch branch will use this tee. It does not suit installations that require press, push-fit or threaded connections. Builders needing equal-sized ports or a different branch size should select another fitting.

Sweat Cup Connections on All Ports

Every port uses a cup sweat connection so the installer must solder the joints. The fitting carries no press or mechanical seal feature. This connection type determines whether the part matches the piping method on the job.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 60% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameNibco

Questions about this item

What copper tube sizes must I already have to connect all three ends of the 611RR reducing tee?

You need 1 1/2 in copper tube for the run ends and 1/2 in copper tube for the branch end.

Can I sweat this reducing tee onto existing copper pipe that has been in service for years?

Yes, the wrot copper body is made for sweat joints on standard copper tube of the same nominal sizes.

After soldering, how can I confirm the 611RR tee is watertight on the potable water line?

Pressurise the system and inspect each sweat joint for leaks; a dry joint under pressure shows the tee is working as intended.

More in Hose Fittings, Adapters & Clamps

Similar items