We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper sweat union fitting with cup connections on both ends

Nibco, Inc.

Nibco, Inc. 633W 1 in Copper Union Trap

SKU CH-M7F6-1Y42B MPN 633W

A 1-inch wrot-copper union trap rated for 494 psi at 100 °F and up to 400 °F service temperature

  • Product typeDrain Components
  • Main materialHAWA
  • Sweat-fitting union joins copper tube without threading
  • Rated 494 psi at 100 °F for high-pressure lines
  • Withstands 400 °F for hot-water or steam service
  • Wrot copper construction resists corrosion in potable systems
  • Straight union design simplifies in-line installation and maintenance

What this union does

The Nibco 633W is a straight sweat-fitting union made from wrot copper for joining two 1-inch copper tubes. It handles air, gases and potable water in residential or light-commercial plumbing systems.

Check before ordering

Verify that both pipe ends are 1-inch copper tube sized for sweat connections and that the system pressure will not exceed 494 psi at 100 degrees F. Confirm the operating temperature stays within the 400-degree F maximum and that local codes permit copper unions for the intended fluid.

Replaces threaded or flanged joints

This union replaces threaded adapters or flanged connections where a compact, soldered joint is preferred. The jump is worth it when you need a leak-tight copper-to-copper transition that can be disassembled for maintenance without cutting pipe.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 74% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameNibco
Model name633 W 1
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

What does the 633W 1 in copper union trap include and what must be purchased separately?

The package contains the straight sweat-fitting union made of wrot copper with 1 in cup connections on both ends. Copper tube, flux, solder and any required hangers or valves are sold separately.

How do I choose between the available versions of the 633W union trap?

The 633W model is offered in a single 1 in nominal size with identical cup-to-cup ends, so there are no alternative capacities or configurations to select from.

What does the 494 psi rating mean when the union is installed in a plumbing system?

It indicates the maximum operating pressure the fitting can withstand at 100 °F; at higher temperatures up to 400 °F the allowable pressure will be lower.

More in Drain Stoppers, Strainers & Traps

Similar items