We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze 90-degree reducing elbow with cup ends, 1-1/4 by 3/4 inch

Nibco, Inc.

Nibco, Inc. 707R-LF 1-1/4 x 3/4 in Reducing Elbow 90 Deg C x C

SKU CH-0Z88-2RSXS

Reducing elbow joins 1-1/4 in and 3/4 in copper tubes at 90 degrees for potable water systems

  • Reduces pipe size from 1-1/4 to 3/4 in with 90 degree turn
  • Sweat copper connections ensure leak-free joints on potable water lines
  • Bronze body withstands 351 psi at 200 degrees Fahrenheit
  • Lead-free construction meets safe drinking water standards
  • Compact elbow design simplifies tight plumbing layouts

1-1/4 x 3/4 in Reducing Elbow

This bronze sweat fitting joins 1-1/4 in and 3/4 in copper tubing at a 90-degree angle. It is rated for potable water systems and handles pressures up to 351 psi at temperatures up to 200 degrees F.

Cup-to-cup sweat connections

Both ends accept copper tube for soldered joints, giving a permanent, leak-resistant seal. The bronze body resists corrosion and meets lead-free requirements for drinking water installations.

Replaces threaded or compression elbows

Use when a direct copper-to-copper transition reduces leak paths and installation time. Not suited for systems that require disassembly or for non-copper piping materials.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $31.99
Pricier than about 71% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameNIBCO

Questions about this item

What pressure does the 707R-LF sweat fitting handle in practice?

The bronze reducing elbow is rated for a maximum operating pressure of 351 psi at 200 Degrees F.

What copper tube sizes must I have to fit this 1-1/4 x 3/4 in elbow?

Side A takes 1-1/4 in copper tube (1 3/8 in OD) and Side B takes 3/4 in copper tube (7/8 in OD).

How do I install the cup-to-cup joint and what step is often missed?

Clean both tube ends and fitting cups, apply flux, insert tubes fully, then heat evenly and feed solder until the joint rings completely; skipping full insertion or uneven heat leaves voids.

More in Hose Fittings, Adapters & Clamps

Similar items