We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree drop elbow, 2-inch sweat fitting, shiny metallic finish

Nibco, Inc.

Nibco, Inc. 9072 2" C x FTG Copper 90 Degree Drop Elbow

SKU CH-RJ9G-MGHV7

A 90-degree copper drop elbow connects 2-inch sweat fittings for waste lines up to 400 degrees Fahrenheit and 5 psi

  • 90-degree turn directs flow efficiently in tight spaces
  • Sweat cup-to-FTG joints create reliable leak-resistant connections
  • Wrot copper construction resists corrosion for long service life
  • Rated to 400 °F and 5 psi for hot-water waste lines
  • Meets ASME B16.29, ASTM B75 and ISO 9001 standards

Copper Sweat Elbow for Waste Lines

This 90-degree drop elbow joins two 2-inch copper tubes in drainage or vent systems. One end accepts a plain tube while the other slips over a fitting, so the joint is made with standard sweat soldering. The wrought-copper body meets ASME B16.29 and ASTM B75 for reliable waste-line service.

Installers needing a cup-to-fitting turn

Plumbers who must transition from tube to fitting in a single 90-degree sweep will find this part fits the job. It is not intended for pressurised supply lines, so installers who need a fitting rated above 5 psi should select a different component.

Rated for 5 psi at 400 Degrees F

The maximum operating pressure of 5 psi and temperature limit of 400 Degrees F define the safe envelope for this elbow. Verify that the system design stays within these limits before specifying the part.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 2,955 items is $17.99.

Specifications

Product
Brand nameNIBCO

Questions about this item

How do I confirm the elbow is seated correctly after soldering?

Visually inspect that both cup ends are fully inserted to the stop and the joint shows a continuous solder fillet; then pressure-test the line up to 5 psi and check for leaks.

What comes with the 9072 elbow and what must I supply?

The box contains the wrot-copper 90-degree drop elbow only; you must provide 2 in copper tube, flux, lead-free solder and a torch for sweat installation.

Which connection style should I select for a 2 in waste line drop?

Choose the C x FTG version when one end joins a 2 in copper tube and the other slides into a 2 in fitting hub; both ends share the same 2 1/8 in outer diameter.

More in Hose Fittings, Adapters & Clamps

Similar items