Nibco, Inc. 911 DWV Tee C x C x C 1-1/2 in
Copper DWV tee with C x C x C connections for 1-1/2 inch tube, rated to 5 psi from -20 to 400 degrees F and meeting ASTM B75 and ASME B16.29 standards
- DWV tee for drain, waste and vent systems
- Wrot copper construction meets ASTM B75 alloy C12200
- Sweat connections on all three outlets simplify copper pipe joins
- Rated for temperatures from -20 to 400 degrees F
- Complies with ASME B16.29 standard for wrought copper fittings
NIBCO DWV Tee 1-1/2 in
This NIBCO DWV tee fitting is made from wrought copper alloy C12200 for drain, waste and vent piping systems. It connects three tube ends using a C x C x C solder-joint configuration. The fitting meets ASTM B75 and ASME B16.29 standards.
Suited for copper DWV installations
Plumbers installing or repairing copper drain lines in residential or light-commercial buildings will find this tee matches the required 1-1/2 inch tube size and pressure rating. It is not intended for pressurised water supply or gas distribution where higher pressure ratings are required.
5 psi maximum pressure rating
The fitting is rated for a maximum pressure of 5 psi across a temperature range of -20 to 400 degrees F. This low-pressure limit determines whether the part is appropriate for a given drainage system.
How it compares
Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 58% of the 2,955 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | NIBCO |
Questions about this item
Will the 1-1/2 in copper tee need any replacement parts or maintenance over time?
The wrought copper tee has no moving parts or serviceable components. Properly soldered joints to ASTM B75 alloy C12200 require no scheduled maintenance under normal drainage, waste and vent conditions.
What is the first limit reached under continuous use at the rated 5 psi?
The 5 psi pressure ceiling is the primary design limit. Sustained operation above that pressure or beyond the 400 °F temperature ceiling would exceed the ASME B 16.29 rating for this fitting.
How much heat does the fitting radiate when hot water runs through it all day?
Copper conducts heat efficiently, so the tee will reach the fluid temperature up to the 400 °F rating. No insulation is included; external surface temperature will match the water temperature inside.
More in Hose Fittings, Adapters & Clamps
Similar items
Black Box Corporation
Black Box Corporation FOT120 SC SC Rectangular Fiber Optic Coupling
$14.99
0.00018229BTC
In stock