We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree elbow fitting, 3/4 inch, smooth finish

Nibco, Inc.

Nibco, Inc. U607 3/4" Copper 90° Elbow Trap

SKU CH-TNEH-D8XJ0 MPN U607

A 3/4 inch wrot copper 90-degree close rough elbow rated to 582 psi at 100 degrees F and compliant with ASME/ANSI B 16.22

  • Product typeDrain Components
  • 90-degree close rough elbow directs flow in tight spaces
  • Wrought copper construction resists corrosion across -20 to 400 °F range
  • C x C solder connection fits 3/4 in nominal tube with 7/8 in outside diameter
  • Rated to 582 psi at 100 °F for reliable pressure performance
  • Meets ASME/ANSI B 16.22 standard for drain component quality

3/4" Copper 90° Elbow Trap

This 3/4 inch nominal wrot copper elbow creates a 90 degree turn in drainage systems. It uses a close rough C x C tube fitting connection with a 7/8 inch outside diameter. The fitting meets ASME/ANSI B 16.22 standards for plumbing installations.

For copper drainage systems needing tight turns

Suits installers joining 3/4 inch copper tube in drain, waste or vent lines where a close radius elbow is required. Not for builders who need a long radius sweep or a fitting rated above 582 psi at 100 degrees F. Not for systems operating below -20 degrees F or above 400 degrees F.

Simple solder installation with standard tools

Clean tube ends and fitting sockets, apply flux, assemble and solder using lead-free alloy. The close rough design leaves minimal clearance for soldering in confined spaces. Overheating can anneal the copper and reduce pressure capacity at the joint.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $2.99
Cheaper than about 96% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameNibco
Model nameU607 3/4
Product typeDrain Components

Questions about this item

What copper tube size must I already have for the U607 3/4" elbow to fit?

The elbow accepts 3/4 inch nominal copper tube with a 7/8 inch outside diameter on both ends.

Can the U607 90° elbow handle the same pressure and temperature range as my existing ASME B16.22 copper piping?

Yes, it is rated to 582 psi at 100 °F and operates from -20 °F to 400 °F under the same ASME/ANSI B16.22 standard.

How can I verify the U607 elbow is correctly soldered and leak-free after installation?

Pressurise the system up to 582 psi at 100 °F and inspect both C x C joints for any sign of leakage.

More in Drain Stoppers, Strainers & Traps

Similar items