We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper P-trap with cup connections, 1 1/4 inch tube size

Nibco, Inc.

Nibco, Inc. U698 11/4 Suction Line P-Trap

SKU CH-S19K-K53Y9 MPN U698

Wrot copper P-trap with sweat cup connections on both 1 1/4 in copper tube sizes, rated for 439 psi at 100 Degrees F and 400 Degrees F maximum temperature

  • Product typeDrain Components
  • Product colorTransparent
  • Wrot copper construction resists corrosion in potable water systems
  • Sweat cup connections create leak-tight joints for air and gas lines
  • P-trap shape maintains water seal to block sewer gases
  • Rated for 439 psi at 100 Degrees F maximum operating pressure
  • Withstands temperatures up to 400 Degrees F for hot water applications

1-1/4 in P-Trap for air, gas and potable water

This wrot-copper P-Trap handles air, gases and potable water at up to 439 psi at 100 °F and 400 °F maximum temperature. Sweat cup connections on both ends accept 1-1/4 in copper tube with a 1-3/8 in outer diameter. Model U698 11/4 is supplied new for residential and light-commercial plumbing installations.

Verify tube size, pressure rating

Confirm that your system uses 1-1/4 in copper tube with a 1-3/8 in outer diameter so the cup fittings seat correctly. Check that the 439 psi rating at 100 °F covers your design pressure and that the 400 °F limit exceeds the highest fluid temperature expected. Ensure local plumbing codes permit wrot-copper P-Traps for the intended air, gas or potable-water service before ordering.

Maintains seal and strength under continuous

The wrot-copper body resists deformation when operated continuously at the rated 439 psi and temperatures approaching 400 °F. Sweat joints remain leak-free during sustained thermal cycling because the fitting and tube expand at similar rates. The P-Trap geometry retains its water seal under steady flow, preventing gas or vapour bypass during long operating periods.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $45.99
Pricier than about 60% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameNibco
Model nameU698 11/4
Product typeDrain Components
Product colorTransparent

Questions about this item

Does the U698 11/4 suction line P-trap include any solder or flux, or must they be purchased separately?

The box contains only the wrot copper P-trap with two cup connections. Solder, flux and any pipe sections are not included and must be sourced separately.

The model shows 1 1/4 in copper tube size on both ends — is there a different capacity version I should consider?

This specific U698 model is built for 1 1/4 in copper tube (1 3/8 in outer diameter) on both sides. No other capacity is offered under this part number.

The spec lists 439 psi at 100 Degrees F — will that pressure hold when the line runs at higher temperature?

The 439 psi rating applies at 100 Degrees F. The fitting is rated to 400 Degrees F maximum operating temperature, but allowable pressure decreases as temperature rises above the reference point.

More in Drain Stoppers, Strainers & Traps

Similar items