No Sew USB 2.0 9-pin to Type-E header extension cable 6.6 in
Extends a motherboard USB 2.0 9-pin header to a Type-E connector for front-panel USB-C, 6.6 in long
- Connection typeUSB 2.0 9 Pin
- Cable length6 in (15.2 cm)
- Thunderbolt 3 supportUsb 2.0 9pin Header
- Connector count1
- Connector detailsUsb 2.0 9pin Header
- Apple compatibilityUsb 2.0 9pin Header
- Adds USB-C front-panel access via a 9-pin USB 2.0 header
- Supports 480 Mbps data transfer on USB 2.0 and USB 3.1 devices
- 6 in length fits tight builds without blocking nearby ports
- Driver-free plug-and-play connection for quick setup
- Multi-layer PCB and differential signalling ensure stable transmission
Header extension for USB-C front panels
This 6.6 in adapter converts a standard motherboard USB 2.0 9-pin header into a USB 3.1 Type-E connector. It lets builders route a front-panel USB-C port on cases where the header is out of reach. The cable uses a vertical PCB layout that avoids blocking adjacent headers.
Suits builders adding a single front-panel USB-C
Ideal for PC assemblers who need to connect a modern case USB-C connector to an older or crowded USB 2.0 header. Not for users who require USB 3.2 Gen 1 or Gen 2 front-panel bandwidth, nor for setups needing multiple Type-E ports from one header.
480 Mbps maximum throughput
The link is limited to USB 2.0 high-speed specifications, so the cable tops out at 480 Mbps even though the Type-E plug fits USB 3.1 devices. Check that your front-panel port and peripheral can operate at this speed before purchasing.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 84% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fyntave |
| Model name | 5413SNSR1265 |
| Product type | USB |
| Ports & slots | |
| Connection type | USB 2.0 9 Pin |
| Thunderbolt 3 support | Usb 2.0 9pin Header |
| Connector count | 1 |
| Connector details | Usb 2.0 9pin Header |
| Power | |
| Plug type | No plug |
| Size & build | |
| Cable length | 6 in (15.2 cm) |
| Overall length | 6 in (15.2 cm) |
| Compatibility | |
| Apple compatibility | Usb 2.0 9pin Header |
| Supported platforms | PC |
Questions about this item
Does my motherboard need a USB 2.0 9-pin header to use this cable?
Yes, the cable plugs into a standard USB 2.0 9-pin header on the motherboard and provides a Type-E connector for the front panel.
Will this adapter limit the speed of a USB 3.1 front-panel port?
The link runs at USB 2.0 rates up to 480 Mbps, so a USB 3.1 device will operate at USB 2.0 speeds through this adapter.
How can I confirm the connection is active after installing the cable?
Plug a USB device into the front-panel Type-C port; if the device appears in the operating system and transfers data, the header link is working.
More in USB Cords & Extension Cables
Similar items
Nippon Labs USB-15-AB USB 2.0 A Male to B Male cable beige
- USB A to USB B
- USB 2.0
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB 3.0 20-pin female to USB 2.0 9-pin male adapter 15cm
- USB Type C
- 0.43 ft (0.13 m)
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable





