We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

No Sew

No Sew WIP01 Waste Ink Pad Kit for EcoTank & L-Series Printers

SKU CH-KQJ8-AWNK2

Replacement waste ink pad kit restores printing on compatible EcoTank and L-series printers with included tools and high-absorbency pads

  • Product categoryPrinter Accessories
  • Product categoryPrinthead
  • Product colorBlack
  • DetailsHigh Yield, 6 L x 5 W x 6 H inches, 10.3124 L x 11.9888 W x
  • Product dimensions14.33 in W × 12.83 in H × 9.06 in D
  • Key featuresHigh Yield, print only, replacement
  • Restores printing by replacing the saturated waste ink pad
  • Compatible with EcoTank ET-2720, ET-2800, ET-2803, ET-2400, ET-4800, ET-4700 and L-series models
  • Complete DIY kit includes two maintenance tanks, screwdriver, tweezers, gloves and manual
  • High-absorbency sponge rated for up to 10000 pages under normal use
  • Reset key and electronic manual available from support if error persists

Replacement Waste Ink Pad Kit

This replacement waste ink pad kit restores printing on compatible EcoTank and L-series printers when a Parts End of Service Life message appears. It fits models including ET-2720, ET-2800, ET-2803, ET-2400, ET-4800, ET-4700, ET-2710, ET-2711, ET-2712, ET-2714, ET-2715, ET-2726, L1110, L1119, L3100, L3106, L3108, L3109, L3110, L3115, L3116, L3117, L3118, L3119 and L3150. The ET-2850 is not supported. Buyers with unsupported printer models cannot use this kit.

DIY Installation and Absorbency

The kit includes two replacement maintenance tanks with high-absorbency sponge pads, a dual-head screwdriver, tweezers, disposable gloves, a sealing bag and a printed instruction manual for a typical 20-minute at-home replacement. The super-absorbent material is designed to support up to 10000 pages and typically lasts 12 years under normal use, though actual life depends on usage. No thermals, noise or power-draw data apply to this consumable part.

Waste Ink Counter Reset Requirement

After installing the new pads, the printer may still show an error until the waste ink counter is reset to zero using a utility program and a security key code. The reset key and electronic manual are not included in the box; they must be obtained by contacting customer support. If you cannot or do not wish to perform this software reset step, the hardware replacement alone will not clear the message.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 94% of the 5,855 comparable items (median $91.99).

Specifications

Product
Product lineWIP01
Model nameWIP01
Part numberWIP01
Product categoryPrinter Accessories
Product colorBlack
Size & build
Product dimensions14.33 in W × 12.83 in H × 9.06 in D

Questions about this item

How do I install the WIP01 waste ink pad kit and what step is often missed?

Remove the old maintenance tanks, fit the two new tanks with their sponges using the supplied dual-head screwdriver and tweezers, then run the reset utility with the security key from support to clear the waste ink counter; skipping the reset leaves the error active.

What maintenance will the WIP01 kit need after installation?

The high-absorbency pads are rated for roughly 10,000 pages or about 12 years of typical use; when the Parts End of Service Life message returns, replace the pads again and reset the counter.

What limit appears first during sustained printing with the WIP01 pads?

The waste ink counter reaches its limit after approximately 10,000 pages, triggering the service life error before the physical pads saturate.

More in Print & Scan Accessories

Similar items