Nomaco Kflex 6RX068348 trap
Insulates 3-inch pipe with NBR/PVC elastomeric foam rated from -297 °F to 220 °F and R-4.2
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Withstands extreme cold down to -297 °F thanks to NBR/PVC elastomeric foam
- Handles high heat up to 220 °F with the same insulation material
- Delivers thermal resistance of R-4.2 for efficient energy savings
- Six-foot length covers long pipe runs in a single piece
- Black NBR/PVC construction resists moisture and UV exposure
Pipe insulation for 3-inch pipe
Nomaco Kflex 6RX068348 is a 6 ft length of unslit pipe insulation designed to fit a 3 in pipe size. The insulation body uses NBR/PVC based elastomeric material with a 3/4 in wall thickness. It has a nominal inside diameter of 3 1/2 in and an approximate R-value of 4.2. The product is black in colour and supplied new.
Suited for freeze protection
This insulation suits installers who need continuous thermal protection on straight runs of 3 in piping. It is not for buyers who require pre-slit or self-sealing insulation for faster installation. It is also not for applications where the operating temperature exceeds 220 °F or drops below -297 °F. The material carries a California Proposition 65 warning for reproductive harm.
Continuous service range -297 °F to 220 °F
The decisive specification is the wide temperature range of -297 °F to 220 °F, which determines whether the material survives the intended environment. Confirm that the system never exceeds these limits before specifying this insulation. The R-value of 4.2 and 3/4 in wall thickness support thermal performance within this envelope.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 59% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Nomaco Kflex |
| Model name | 6RX068348 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What temperature range does the NBR/PVC elastomeric insulation cover?
The insulation is rated from -297 °F up to 220 °F, covering both cryogenic and high-temperature plumbing applications.
What pipe size and wall thickness does the 6 ft length fit?
It fits a 3 in pipe with a 3/4 in wall thickness and has a nominal inside diameter of 3 1/2 in.
How is the unslit pipe insulation installed without a pre-cut seam?
Slit the 6 ft length lengthwise with a sharp knife, wrap it around the 3 in pipe, then seal the seam with compatible adhesive tape or glue.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne 270016 Pneumatic Test Ball Plug 1-1/4 to 1-1/2 in
- Drain Components
- HAWA
Power Drive C4016X7/8 Chain Coupling Sprocket 16T 7/8 in Bore
- Drain Components





