NShi 4 in 1 Digital pH EC Meter LCD Tester Red
Measures pH, EC, TDS and temperature with 0.01 pH resolution, 0–9990 ppm range and automatic 0 °C–60 °C (32 °F–140 °F) compensation, calibrated at pH 4.00, 6.86 and 9.18
- Product typeAnalog Multimeters
- Measures pH, EC, TDS and temperature in one pen
- 0–14 pH range with 0.01 resolution for precise readings
- Automatic temperature compensation from 0 °C to 60 °C (32 °F to 140 °F)
- Three-point calibration at pH 4.00, 6.86 and 9.18 ensures accuracy
- Wide conductivity range up to 9990 ppm covers diverse water sources
Pocket Water Quality Tester
The NShi 4 in 1 Digital pH EC Meter measures pH, EC, TDS and temperature in a single red ABS pen. It targets hydroponic growers, aquarium keepers and anyone who needs rapid water-quality checks without laboratory equipment. The 0–14 pH range with 0.01 resolution and 0–9990 ppm span covers typical nutrient solutions and tank water.
Automatic Calibration and Compensation
A three-point calibration routine aligns the glass electrode to pH 4.00, 6.86 and 9.18 reference solutions, removing manual guesswork. Automatic temperature compensation adjusts readings across 0 °C–60 °C (32 °F–140 °F) so changing liquid temperature does not skew results. The high-sensitivity probe and algorithm chip deliver stable values within seconds.
Probe and Scale Limits
The glass bulb is fragile and must stay moist; dry storage or impact can ruin accuracy. The 0–9990 ppm ceiling means very concentrated brines or industrial effluents fall outside the readable range. Users needing data logging, PC connectivity or replaceable electrode modules will find this pen lacks those features.
How it compares
Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 75% of the 3,030 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Product type | Analog Multimeters |
Questions about this item
How often will the glass probe need replacing?
The high-sensitivity glass probe is a consumable part; plan to replace it when calibration drifts or response slows, typically after months of daily hydroponic use.
What measurement ceiling stops the EC/TDS reading first?
The tester tops out at 9990 ppm, so nutrient solutions above that level will read at the maximum instead of their true value.
Does the meter heat up or make noise during continuous monitoring?
No moving parts or active cooling are present; the LCD tester draws minimal power and stays silent and cool even during all-day operation.
More in Meters, Testers & Measuring Tools
Similar items
NSI YDF03270922 5-in-1 Stud Finder measurement tool
- Continuity Testers
- Digital LCD Display…





