We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nycoil

Nycoil 1/4" OD Nylon Tubing Blue 50 ft

SKU CH-49CR-QYT43

Blue nylon tubing rated to 400 psi at 68 degrees F, 50 ft length with 1/4 in outside diameter

  • Blue colour aids quick line identification
  • Nylon construction resists wear and chemicals
  • 400 psi rating at 68 Degrees F handles demanding air systems
  • 50 ft continuous length reduces joints and leaks
  • Shore D 60 hardness keeps shape under pressure

Blue Nylon Tubing 50 ft

Zoro Select 1/4 in OD nylon tubing comes in a 50 ft blue coil rated for 400 psi at 68 Degrees F. The 11/64 in inside diameter and Shore D 60 hardness suit compressed-air lines and general fluid transfer. Supplied without a jacket for direct fitting attachment.

Suits air-line runs up to 175 Degrees F

Installers needing vacuum service to 28 in Hg or moderate heat resistance will find this tube adequate. Buyers who need higher pressure ratings, tighter bend radiuses or a jacketed construction for abrasion protection should select a different product.

400 psi working pressure at 68 Degrees F

This single pressure figure determines whether the tubing matches your system design. Verify that your circuit never exceeds this limit at the operating temperature before purchase.

How it compares

Measured against everything we stock in Garden Hoses & Pipe Tubing, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 73% of the 973 comparable items (median $21.99).

Specifications

Product
Brand nameZORO SELECT

Questions about this item

How much pressure can the 1/4 in OD nylon tube handle at 68 Degrees F?

The tubing is rated for a maximum operating pressure of 400 psi at 68 Degrees F, and it can withstand up to 28 in Hg of vacuum.

What fittings are needed for the 11/64 in inside diameter?

You will need fittings that seal on a 1/4 in outside diameter with an 11/64 in bore; standard push-to-connect or compression fittings for 1/4 in OD nylon work.

Will the 50 ft coil stay flexible when routed near parts that reach 175 Degrees F?

Yes, the nylon material is rated for a maximum operating temperature of 175 Degrees F and has a Shore D 60 hardness that resists softening at that temperature.

More in Garden Hoses & Pipe Tubing

Similar items