We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue polypropylene Schedule 40 no-hub cap, 1-1/2 inch nominal size

Orion

Orion 1-1/2" No Hub Cap Sch 40 Blue

SKU CH-XFQK-WQ0DW

Schedule 40 polypropylene no-hub cap fits 1-1/2 inch pipe, rated from -20 to 160 degrees F

  • 1-1/2 inch no-hub cap fits Schedule 40 pipe
  • Blue polypropylene body resists corrosion and chemicals
  • Operates from -20 to 160 degrees Fahrenheit
  • Schedule 40 rating meets standard pressure requirements
  • Pre-applied sealant not included for flexible installation

1-1/2 Inch No Hub Cap Schedule 40

This blue polypropylene cap fits 1-1/2 inch nominal pipe in Schedule 40 drainage systems. The no hub design accepts plain-end pipe without threads for solvent-weld installation. It operates from -20 degrees to 160 degrees F in standard plumbing applications.

Pre Applied Thread Sealant Not Included

The fitting ships without pre applied thread sealant and without a separate seal. Installers must supply their own solvent cement or compatible sealant to create a watertight joint. This gives the plumber full control over the bonding material used.

Nominal Pipe Size 1 1/2 Inches

The 1 1/2 inch nominal size determines compatibility with Schedule 40 pipe of the same designation. An outside diameter of 1 7/8 inches and overall length of 2 1/4 inches confirm the physical fit. Builders needing a different diameter must select another cap.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $32.99
Pricier than about 71% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameORION

Questions about this item

How often should the polypropylene cap be inspected or replaced?

The Schedule 40 polypropylene material is rated for continuous service from -20 °F to 160 °F; inspect annually for stress cracking or deformation and replace if the wall shows thinning.

What is the first limit reached when the cap is under constant pressure and temperature?

The 160 °F upper temperature rating is the primary design limit; sustained exposure above this value will accelerate creep and reduce the pressure-holding capacity of the Schedule 40 wall.

Does the cap generate heat or noise during all-day operation?

As a static, non-mechanical fitting the cap produces no noise, no vibration and no measurable heat of its own; it simply conducts the fluid temperature up to the 160 °F rating.

More in Hose Fittings, Adapters & Clamps

Similar items