We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue polypropylene 90 degree elbow fitting with no hub connections

Orion

Orion 2 in 90 Degree Elbow 1/4 Bend No Hub Sch 40

SKU CH-Z9E3-XSDF0

A 2-inch polypropylene 90-degree elbow for Schedule 40 pipe, rated to 80 psi and 160°F

  • 90-degree elbow redirects flow efficiently in tight plumbing layouts
  • Polypropylene construction resists corrosion and chemical attack across 0 to 160 °F
  • Schedule 40 compatibility fits standard piping without adapters
  • No-hub male ends allow quick solvent-weld or mechanical joint assembly
  • Rated for 80 psi maximum operating pressure for reliable service

2-Inch Schedule-40 Drain Elbow

This polypropylene elbow redirects a 2-inch no-hub drainage line through a 90-degree quarter bend. The fitting is rated for Schedule 40 pipe at 80 psi maximum operating pressure and handles fluid temperatures from 0 to 160 degrees Fahrenheit. Overall length measures 6 13/16 inches with a 2 3/8-inch hub depth on each male end.

Suits Gravity Drain Stacks Not Pressurised Mains

Installers working on residential or light-commercial DWV systems will find the dimensions match standard 2-inch no-hub connections. The fitting is not intended for pressurised water supply lines, hot-water recirculation loops or any service exceeding the stated 80 psi limit. Projects requiring solvent-weld sockets, copper sweat joints or larger diameters should select a different fitting.

Push Into No-Hub Couplings Check Alignment First

Installation consists of sliding each male end into a no-hub coupling and tightening the clamps; no solvent cement or threading is required. The most common issue is angular misalignment between the two pipe runs, which stresses the couplings and can cause leaks. Verify that both pipe centre-lines meet at a true 90-degree angle before final tightening.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 55% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameORION

Questions about this item

What pipe outside diameter and schedule must I already have for this 2 in no-hub elbow to connect?

It fits 2 in outside-diameter pipe built to Schedule 40 dimensions.

Will this polypropylene elbow handle the same 160 °F temperature limit as my existing Schedule 40 piping?

Yes, its rated range is 0 to 160 °F, matching typical Schedule 40 service temperatures.

After installation, how can I confirm the joint is holding at the rated 80 psi?

Pressurise the system to 80 psi and inspect the no-hub connection for leaks.

More in Hose Fittings, Adapters & Clamps

Similar items