Outdoor Light Timer Waterproof 100ft Remote Control Dusk to Dawn Light Sensor Timer 15A 1875W ETL Listed

Outdoor Light Timer with 100ft Remote

This waterproof timer switch mounts on a wall and plugs into a standard 125-volt outlet to control outdoor lighting fixtures and other electrical devices. A built-in light sensor enables automatic dusk-to-dawn operation, while the handheld remote lets you select from eight timing functions including always on, always off, and timed durations of two, four, five, six or eight hours after dusk. The unit is ETL listed and rated for 15 amps and 1875 watts.

Simple Push-Button Setup and Vertical Mounting

No programming is required; you simply press the desired function button on the remote to activate the corresponding timer mode. The RF signal travels up to 100 feet through walls, doors and windows without interfering with other devices, so you can operate the timer from indoors. For reliable waterproof performance the enclosure must be mounted vertically at least two feet above ground level; horizontal or low mounting can allow water ingress.

Verify Voltage, Load and Mounting Location

Before ordering, confirm that your outdoor circuit supplies 125 volts and that the combined load of connected devices does not exceed 15 amps or 1875 watts. Ensure you have a suitable vertical surface such as a wall or post at least two feet high for mounting the IP65-rated enclosure. The timer provides two grounded receptacles with screw terminals, so check that your device plugs are compatible with this receptacle type.