Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2666 ECC unbuffered VLP DIMM for workstations, servers and NAS systems
This 16GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.2V operation. It targets workstations, servers and NAS systems that require error-correcting code memory. The unbuffered 2Rx8 design fits standard 288-pin desktop slots without registration overhead. JEDEC and ROHS compliance ensures a warranty-safe upgrade path.
Operating at the standard 1.2V keeps power draw low and heat output minimal during typical workloads. No heat spreader is fitted, so the VLP profile relies on case airflow for cooling. The low voltage and absence of LEDs contribute to quiet, efficient operation in densely populated DIMM banks.
The module ships as a single 16GB DIMM with no extra cables, brackets or software utilities. OWC validates every stick in-house to meet or exceed OEM specifications for the listed Hynix and Micron part numbers. A limited lifetime warranty and free technical support back the upgrade, but no installation media or monitoring tools are included.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2E6V42R816 GB |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | Workstations, Servers, and NAS Systems |
| More details | |
| LED lighting | None |
Power off the system, open the case, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the module reports 16 GB at 2666 MT/s and ECC is enabled; the step most often missed is confirming ECC mode in firmware after the physical install.
No scheduled maintenance is required; keep interior dust-free and ensure the 1.2 V supply remains stable. If a correctable error count rises or the system logs uncorrectable ECC events, replace the module — otherwise it runs for the system life.
The JEDEC 1.2 V / CL19 timing ceiling is reached before thermal throttling; sustained write/read streams max out at the rated 2666 MT/s bandwidth, so throughput plateaus at the spec data rate rather than hitting a temperature wall.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?