OWC 256GB (2x128GB) DDR4 2933 CL21 8Rx4 ECC LRDIMM memory upgrade HP ProLiant XL270d Gen10
- 256 GB (2 × 128 GB)
- DDR4 2933
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
256 GB dual-channel DDR4 3200 ECC load-reduced kit for servers, workstations and NAS systems
Capacity 256GB (2 x 128GB)
This OWC kit delivers 256GB across two 128GB DDR4 3200MHz LRDIMMs. The modules implement ECC load-reduced technology with a 4Rx4 rank structure and CL22 latency. They are built for servers, workstations and NAS systems that require registered memory and cannot accept standard unbuffered DIMMs.
Running at 1.2V, the modules draw less power per gigabyte than higher-voltage alternatives. The load-reduced buffer lowers electrical loading on the memory bus, which helps maintain signal integrity without adding active cooling requirements. No heat spreaders are fitted, so airflow across the PCB handles dissipation in typical chassis designs.
Each module uses the standard 288-pin DDR4 form factor and is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds. The kit cannot be mixed with unbuffered memory and will not work in desktop consumer platforms that lack LRDIMM support. It frees DIMM slots by concentrating 128GB per module, leaving room for further expansion where the platform allows.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 3L2D44R4256P |
| Total capacity | 256 GB (2 × 128 GB) |
| Product type | 288-Pin DDR4 ECC LRDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Kit configuration | Dual Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Other versions of this model
Power down the server, open the chassis, locate the paired memory slots for dual-channel operation, align each 288-pin module's notch with the slot key, press firmly until both retention clips click, then verify the BIOS reports 256GB at 3200MHz CL22.
No scheduled maintenance is required; the modules have no heat spreader, so keep server airflow clean, and if a 128GB module ever fails ECC correction, replace the individual stick rather than the full 256GB kit.
The JEDEC-rated 1.2V voltage and CL22 latency are the first limits; under continuous heavy load the memory controller will throttle speed before exceeding the 1.2V spec, so ensure adequate cooling to sustain 3200MHz operation.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?