OWC 128GB (4x32GB) DDR3L 1600 PC3L-12800 CL11 4Rx4 240-pin 1.35V ECC Registered RDIMM Kit
- 128 GB (4 × 32 GB)
- DDR3L 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A single 32 GB DDR5 module running at 4800 MHz with CL40 latency and 1.1 V operation for desktop upgrades
This is a single 32GB DDR5 4800 CL40 unbuffered UDIMM that runs at 1.1V. It is built for desktop, workstation, NAS and all-in-one systems that accept standard 288-pin DDR5 memory. The module follows JEDEC specifications and contains no ECC or heat spreader.
The DIMM seats in a regular 288-pin DDR5 slot with a simple press until the retention clips click. No extra cables, drivers or software are required. The most common issue is inserting the module backwards or not pressing firmly enough on both ends, which leaves the clips unlatched and causes a no-boot condition.
Before ordering, confirm that your board or system lists DDR5 4800 (PC5-38400) unbuffered non-ECC UDIMMs on its qualified vendor list. Verify how many 288-pin slots are free and whether the firmware requires a specific population order for single- or dual-channel operation.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 4U8D52R832 GB |
| Total capacity | 32 GB |
| Product color | Black |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Recommended for | Desktops |
| More details | |
| LED lighting | None |
Other versions of this model
Yes, it uses the 288-pin UDIMM form factor designed for desktop, workstation, NAS and all-in-one systems that accept DDR5 memory.
The module operates at the JEDEC-standard 1.1 V, so compatible platforms will configure it automatically at the rated 4800 MT/s CL40 speed.
The module ships without a heat spreader; JEDEC-compliant 1.1 V operation typically stays within thermal limits for normal desktop workloads.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?