OWC 32GB (4x8GB) DDR4 2666 CL19 ECC UDIMM memory upgrade
- 32 GB (4 × 8 GB)
- DDR4 2666
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four 16 GB DDR3L modules running at 1866 MHz CL13 and 1.35 V give 64 GB of unbuffered, non-ECC desktop memory
Capacity 64GB (4 x 16GB)
This OWC kit supplies 64 GB of DDR3L memory across four 16 GB unbuffered UDIMMs. Each module runs at 1866 MT/s with a CAS latency of CL13 at the JEDEC-standard 1.35 V. The 240-pin DIMMs are non-ECC and carry no heat spreader, making them a straightforward drop-in for compatible desktop and workstation boards.
Builders restoring or expanding older DDR3L systems that accept 16 GB density per slot will reach 64 GB without mixing modules. Systems that require ECC, registered DIMMs, or a different DDR generation cannot use this kit. Boards limited to lower per-slot densities or higher voltage-only operation should look elsewhere.
The 16 GB per module density is the single specification that determines whether a motherboard can populate all four slots to reach the full 64 GB. Verify that the target platform supports 2Rx8 16 GB DDR3L UDIMMs before purchase.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1U8T32R8064S |
| Total capacity | 64 GB (4 × 16 GB) |
| Product color | Black |
| Performance | |
| Rated speed | DDR3L 1866 (PC3L 14900) |
| Memory | |
| CAS latency | CL13 |
| ECC support | No |
| Buffer type | Unbuffered |
| Kit configuration | Dual Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
| Compatibility | |
| Recommended for | Desktops |
| More details | |
| LED lighting | None |
Other versions of this model
Yes, every module in the kit runs at 1.35 V, matching the DDR3L specification.
The board must accept 16 GB density per slot; otherwise the full 64 GB will not be recognised.
Mixing speeds forces the system to run at the slowest installed module, so matched kits are recommended.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?