OWC 64GB DDR4 3200 ECC Registered RDIMM CL22 1.2V 2Rx4 288-pin server RAM
64 GB DDR4 3200 ECC registered RDIMM for servers, workstations and NAS systems with CL22 latency and 1.2 V operation
- CAS latency22
- Rated voltage1.2 V
- Buffer typeRegistered
- Product type288-Pin DDR4 ECC RDIMM
- 64 GB capacity handles heavy server workloads
- DDR4 3200 MHz speed with CL22 latency
- ECC registered design protects data integrity
- 2 V operation reduces power draw
- Backward compatible with 2133, 2400, 2666, 2933 MHz systems
Server memory upgrade for Dell systems
This OWC 64GB DDR4 3200 ECC registered RDIMM replaces the Dell AA783423 module in compatible servers and workstations. It delivers PC4-25600 speed at CL22 latency with 1.2V operation. The single 2Rx4 288-pin module adds 64GB of error-correcting capacity per slot.
Upgrade from lower-capacity or slower DDR4 RDIMMs
The jump is worthwhile when your workload needs more than 32GB per channel or when replacing 2133MHz, 2400MHz, 2666MHz or 2933MHz modules with the 3200MHz JEDEC-standard part. Backward compatibility lets you mix speeds while the system runs at the lowest installed frequency.
Suits IT teams extending server life
Buyers who need unbuffered desktop memory or load-reduced ECC DIMMs cannot use this registered module. Systems that require registered ECC RDIMMs in 288-pin DDR4 form factor will accept this upgrade.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $352.99
- Pricier than about 64% of the 6,523 comparable items (median $188.99).
- CAS latency 22
- Lower than about 80% of the 439 comparable items (median 40).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 3R2D42R464 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Memory | |
| CAS latency | 22 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
Will this 288-pin DDR4 RDIMM fit my server's memory slots?
The module uses the standard 288-pin DDR4 RDIMM form factor and runs at 1.2V. It fits any server, workstation or NAS system that accepts registered ECC DDR4 DIMMs.
What is the correct way to install this registered ECC module, and what mistake should I avoid?
Power down the system, open the chassis, align the notch on the 288-pin edge connector with the slot key, and press firmly until both retention clips click. Do not mix this registered DIMM with unbuffered or load-reduced ECC memory.
When will this 64GB DDR4 module need replacement or maintenance?
The memory has no moving parts and requires no routine maintenance. It carries a limited lifetime warranty, so replacement would only be needed if a module fails or if you later upgrade to a higher capacity or newer DDR generation.
More in ECC Server RAM
Similar items
Kingston Server Premier 32GB 3200MT/s DDR4 ECC Reg CL22 DIMM 2Rx4 Hynix D Rambus server RAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KTH-PL426/32G 32GB DDR4 2666MHz CL19 ECC Registered 288-pin server RAM
- 32 GB
- DDR4 2666
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KTL-TS432/32G 32GB DDR4 3200 CL22 ECC Registered server RAM
- 32 GB
- DDR4 3200





