We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OWC

OWC 8GB (4x2GB) DDR3 1333 CL9 desktop RAM

SKU CH-NDPC-AKPTG

A four-module kit of unbuffered DDR3 desktop DIMMs running at 1333 MHz with CL9 latency and 1.5 V operation

  • Total capacity8 GB (4 × 2 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • CAS latencyCL9
  • Rated voltage1.5 V
  • Buffer typeUnbuffered
  • Kit configurationDual Channel Kit
  • Boosts multitasking with 8GB total capacity across four 2GB modules
  • Runs at DDR3 1333 speed with CL9 latency for responsive desktop performance
  • Operates at standard 1.5V voltage for broad motherboard compatibility
  • Unbuffered non-ECC 240-pin DIMMs install easily in desktop systems
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Ready-to-install desktop upgrade kit

This OWC kit supplies 8 GB of DDR3 memory across four 2 GB unbuffered DIMMs. It targets owners of desktop or workstation systems that accept 240-pin modules running at 1333 MHz with CL9 timing. The 1.5 V operating voltage matches the JEDEC standard for this generation. No heat spreaders or LEDs are fitted.

Plain black PCB with standard 240-pin layout

Each module uses a conventional green PCB in black colouring and the industry-standard 240-pin edge connector. The dual-channel kit designation means the four sticks are matched for paired-channel operation on compatible motherboards. Installation follows the usual DIMM slot procedure without special tools or clearance concerns. Non-ECC, unbuffered design keeps compatibility broad for consumer platforms.

Low-voltage operation keeps thermals modest

At 1.5 V the modules draw little power and generate minimal heat during typical desktop workloads. Absence of a heat spreader means they rely on case airflow, which is sufficient at this speed and density. Silent operation is assured because no active cooling is present. The kit delivers a straightforward capacity boost without adding thermal or acoustic load.

How it compares

Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.

Price $55.99
Cheaper than about 62% of the 3,647 comparable items (median $90.99).
Total capacity 8 GB (4 × 2 GB)
Lower than about 60% of the 3,251 comparable items (median 16 GB).
Price per GB $7.00 per GB
Typical for this category: the median of 3,251 items is $6.75 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1U3D31R8008S
Total capacity8 GB (4 × 2 GB)
Product colorBlack
Performance
Rated speedDDR3 1333 (PC3 10600)
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Kit configurationDual Channel Kit
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Recommended forDesktops
More details
LED lightingNone

Other versions of this model

5 more in the same range

Questions about this item

What maximum data rate does the DDR3 1333 PC3-10600 interface cap at in practice?

The kit runs at 1333 MT/s with a PC3-10600 peak bandwidth rating, so the practical ceiling is 10600 MB/s per module under standard JEDEC timings.

What physical slot and clearance does the 240-pin UDIMM need to fit?

Each 240-pin DIMM requires a standard desktop DDR3 slot; the modules have no heat spreader, so they fit under most stock CPU coolers without height conflicts.

How is the 4x2 GB kit installed, and which step do people often get wrong?

Power off, open the case, align the notch on each 240-pin module with the slot key, press firmly until both retention clips click, then populate matched-colour slots for dual-channel operation.

More in Desktop RAM

Similar items