OWC 8GB DDR3 1333 ECC Registered RDIMM Server RAM
8GB DDR3 1333 ECC registered server memory module with CL9 latency and 1.5V operation
- Total capacity8 GB
- Rated speedDDR3 1333 (PC3 10600)
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeRegistered
- Memory rank2Rx4
- ECC registered design protects server data integrity
- DDR3 1333 speed matches PC3-10600 specification
- 8GB capacity with 2Rx4 rank organisation
- JEDEC and ROHS compliant for warranty-safe upgrades
- 240-pin 1.5V module fits registered DIMM slots
Server ECC Registered DIMM
This 8 GB DDR3 module is built for workstations and servers that require ECC registered memory. It operates at 1333 MHz with CL9 latency and a 1.5 V supply. The 2Rx4 dual-rank organisation suits multi-slot configurations where registered buffering is mandatory.
240-pin DDR3 form factor
The standard 240-pin RDIMM layout fits server mainboards designed for registered ECC DDR3. No heat spreader is fitted, so airflow across the PCB is unimpeded in dense chassis. JEDEC and RoHS compliance confirms the module meets baseline electrical and environmental specs for warranty-safe upgrades.
Verify registered ECC support
Check that your platform explicitly accepts DDR3 registered ECC RDIMMs; standard desktop boards will not post with this module. Do not mix registered and unbuffered DIMMs in the same system. Confirm the memory controller can address 2Rx4 modules at the required speed before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $24.99
- Cheaper than about 93% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.12 per GB
- Cheaper than about 88% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R3D32R408 GB |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 ECC RDIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
What does the DDR3 1333 PC3-10600 CL9 rating mean for real-world throughput?
The module runs at 1333 MT/s with a peak bandwidth of PC3-10600 and a CAS latency of 9 cycles, so sustained throughput is capped by the DDR3-1333 JEDEC ceiling.
What slot and physical clearance does the 240-pin 2Rx4 RDIMM require?
It needs a standard 240-pin DDR3 DIMM socket; the registered 2Rx4 design adds a register chip but keeps the same height as a plain DDR3 module, so no extra clearance is needed.
How do I install this ECC registered RDIMM and what step is commonly missed?
Power down, open the chassis, align the notch on the 240-pin edge connector, press firmly until both latches click, then verify in BIOS that ECC and registered mode are enabled — skipping the BIOS check is the step most people forget.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR667D2D8P5/1G 1GB DDR2 667 ECC Registered server RAM
- 1 GB
- DDR2 667
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR667D2S8F5/1G 1GB DDR2 Fully Buffered ECC Server RAM
- 1 GB
- CL5
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KVR16R11S8/4I 4GB DDR3 1600 CL11 ECC Registered server RAM
- 4 GB
- DDR3 1600





