We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tan fiberglass pipe insulation tube with adhesive slit and flap, 3 ft length

Owens Corning

Owens Corning 200265 3 in x 3 ft fiberglass pipe insulation trap

SKU CH-1SGH-XCZ2W MPN 200265

Fiberglass pipe insulation with adhesive slit and ASJ facing, rated to 1,000 °F and R-5.5 for 3-inch pipe

  • Product typeDrain Components
  • Product colorTan
  • Reduces heat loss with R-5.5 thermal resistance
  • Withstands extreme temperatures from 0 °F to 1,000 °F
  • Fire-safe with flame spread 25 and smoke developed 50
  • Self-sealing slit design with adhesive flap speeds installation
  • Plenum rated for use in air-handling spaces

Fiberglass pipe insulation for 3-inch pipes

This Owens Corning 200265 insulation tube fits 3-inch pipe with a 1-inch wall thickness and 3-foot length. The fiberglass core carries an R-value of 5.5 and is rated for temperatures from 0 to 1,000 degrees F. It is plenum rated with a flame spread index of 25 and smoke developed index of 50. The tan ASJ facing adds durability and a clean finish.

Verify pipe size and operating limits before

Confirm the pipe outside diameter matches the 3 17/32-inch inside diameter so the slit tube seats correctly. Ensure the system temperature stays within the 0 to 1,000 degree F range for the fiberglass material. Check that local codes accept the 25 flame spread and 50 smoke developed ratings for the intended location.

Slit adhesive flap speeds installation

The pre-cut slit with adhesive flap lets you wrap the tube around existing pipe without disconnecting fittings. The ASJ facing resists tears during handling and protects the fiberglass from moisture. No separate tape or fasteners are required for a secure seal.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 74% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameOwens Corning
Model name200265
Product typeDrain Components
Product colorTan

Questions about this item

What comes in the box and what extra items are needed for installation?

The package contains one 3 ft fiberglass tube with a 1 in wall, slit with adhesive and flap. No extra fasteners or tape are required because the adhesive flap seals the seam.

How do I decide between the available sizes for this insulation?

Choose the 3 in inside diameter (3 17/32 in) when insulating 3 in nominal pipe; the 1 in wall provides an R value of 5.5 for that pipe size.

What does the R 5.5 rating mean once the wrap is on a hot pipe?

R 5.5 indicates the thermal resistance of the 1 in fiberglass wall, limiting heat loss from pipe surfaces operating up to 1,000 Degrees F.

More in Drain Stoppers, Strainers & Traps

Similar items