Panasonic BR2330A/FAN 3V Lithium Coin Cell Battery w/Tabs 6-Pack

Panasonic BR2330A/FAN 3V Lithium 6-Pack

This pack contains six Panasonic BR2330A/FAN lithium coin cells, each rated at 3 volts with a 23 mm diameter and 3 mm height. The cells are supplied with SMD tabs for direct surface-mount soldering onto circuit boards. They suit engineers, technicians and hobbyists who need a reliable primary power source for memory-backup, real-time clocks or small sensor nodes. The chemistry delivers a stable voltage curve and a shelf life of up to 10 years when stored correctly.

SMD-tab termination ready for board mounting

The pre-welded SMD tabs remove the need for a separate battery holder or hand-soldering loose cells, saving assembly time and reducing the risk of cold joints. Because the tabs are designed for reflow or wave-solder processes, the pack integrates cleanly into automated production lines as well as hand-build prototypes. No additional hardware or adhesive is required to secure the cells once they are soldered in place.

BR2330 footprint with 3 V lithium chemistry

The decisive specification is the BR2330 form factor combined with lithium chemistry at 3 volts; only boards laid out for a 23 mm by 3 mm cell with tab pads can accept these batteries. Builders whose designs call for a different diameter, thickness, voltage or through-hole pin layout cannot use this pack. The 10-year shelf life supports long-term spares holding but does not alter the mechanical or electrical fit requirement.