We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact 12.1 inch industrial all-in-one PC with flat IP65 front panel, aluminium fanless chassis, resistive multi-touch screen

partaker

Partaker A19 12.1" IP65 Industrial All-in-One PC i3-10110U 16GB 512GB

SKU CH-WQX6-4GEHY

A 12.1" IP65-rated industrial all-in-one PC with a resistive multi-touch screen, Intel Core i3-10110U, 16GB DDR4 and a 512GB SATA SSD, running Windows 11 Pro in a fanless aluminium chassis

  • Screen size12.1 in (30.7 cm)
  • ProcessorIntel Core i3 10th Gen
  • RAM capacity16 GB DDR4
  • SSD storage512 GB
  • GraphicsIntel UHD Graphics
  • Operating systemWindows 11 Pro

CPU Type Intel Core i3 10th Gen

Memory Capacity 16GB DDR4

SSD 512GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

Industrial IP65 Panel PC

The Partaker A19 is a 12.1-inch industrial all-in-one computer with an IP65-rated front panel. It runs on an Intel Core i3-10110U processor with 16GB of DDR4 memory and a 512GB SSD. The fanless aluminium chassis supports 9-36V wide-voltage input and comes with Windows 11 Pro pre-installed.

Suited for rugged environments, not consumer use

This unit fits embedded installations, machine interfaces and factory automation where dust, water jets and wide temperature ranges are present. The resistive multi-touch screen works with gloves. Buyers needing a capacitive multi-touch experience, higher screen brightness, discrete graphics performance or a different storage interface should look elsewhere.

9-36V DC Phoenix power input

The 2-pin Phoenix connector accepts 9-36V DC, allowing direct connection to industrial power systems without an external adapter. This wide-range input is the key specification for integrating the panel PC into existing control cabinets or mobile equipment.

How it compares

Measured against everything we stock in All-in-One PCs, at today’s prices. Recalculated every night.

Price $787.99
Pricier than about 68% of the 4,281 comparable items (median $690.99).
Screen size 12.1 in (30.7 cm)
Lower than about 93% of the 4,191 comparable items (median 23 in).
RAM capacity 16 GB DDR4
Typical for this category: the median of 3,738 items is 16 GB.

Specifications

Product
Model nameA19-New-I3-10110U-16G512G
Processor
ProcessorIntel Core i3 10th Gen
Memory
RAM capacity16 GB DDR4
Max supported RAM32 GB
Storage
SSD storage512 GB
Hard driveNo
Display
Screen size12.1 in (30.7 cm)
Touch inputYes
Graphics
GraphicsIntel UHD Graphics
Size & build
Form factorAll-in-One
Software
Operating systemWindows 11 Pro

Other versions of this model

5 more in the same range

Questions about this item

What external power source does the 9-36V 2-pin Phoenix connector require?

The unit accepts a DC input from 9 V to 36 V through the 2-pin Phoenix connector; the included 12 V 5 A adapter covers that range.

Can the two Intel 1000M LAN ports and the four USB 3.0 ports run simultaneously with legacy RS-232 devices on the COM ports?

Yes, the two Gigabit LAN ports, four USB 3.0 ports and two COM ports (configurable for RS232/RS422/RS485) are all independent and operate at the same time.

How do I confirm the TPM 2.0 module is active after Windows 11 Pro starts?

Open Windows Security, go to Device security, and verify that a TPM 2.0 ready status appears under Security processor.

More in All-in-One PCs

Similar items