Pelican Products, Inc. 1560-000-110 camera case
A rolling camera case with foam, retractable handle, polyurethane wheels, O-ring seal and pressure valve, watertight to 115 lbs buoyancy
- Product typeRolling Case
- Product colorBlack
- Product dimensionsExterior Dimensions(L × W × D): 22.06 in × 17.93 in × 10.43
- DetailsLid Depth: 2 in(5.1 cm) Bottom Depth: 7 in(17.8 cm) Total De
- Key featuresRetractable extension handle Strong polyurethane wheels with
- Rolling mobility via retractable handle and two polyurethane wheels
- Watertight and dustproof protection from O-ring seal and automatic pressure valve
- Customisable interior using Pick N Pluck foam with convoluted lid layer
- Crushproof strength from open-cell core and solid-wall construction
- Extreme temperature resilience rated from -40 to 99 °C
Rolling camera case with foam
The Pelican 1560 is a watertight rolling case built to protect cameras and accessories during transport. Its O-ring seal and automatic pressure equalisation valve keep out water and dust while balancing internal pressure. The open-cell core with solid-wall construction gives high strength at a relatively low weight. Two polyurethane wheels and a retractable handle let you pull the case instead of carrying it.
Pick N Pluck foam and nameplate service
The case ships with two levels of Pick N Pluck foam plus a convoluted lid layer that you can customise to fit specific gear. Removing the foam reduces weight from 20 lbs to 17 lbs and increases usable volume. A personalised nameplate service is available for identification. Stainless steel hardware and padlock protectors secure the contents without adding proprietary locking systems.
Temperature and buoyancy limits
The case is rated for operation between 40 °F and 210 °F (–40 °C to 99 °C), so it is not suited for environments outside that range. Maximum buoyancy is 115 lbs, meaning it will not support heavier loads in water. Interior depth of 9.00 inches limits the height of equipment that can be stored upright. Buyers needing deeper compartments or wider temperature tolerance should consider other options.
How it compares
Measured against everything we stock in Camera Bags & Protective Cases, at today’s prices. Recalculated every night.
- Price $139.99
- Pricier than about 69% of the 1,297 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | PELICAN |
| Model name | 1560 |
| Product type | Rolling Case |
| Product color | Black |
| Size & build | |
| Product dimensions | Exterior Dimensions(L × W × D): 22.06 in × 17.93 in × 10.43 in(56 × 45.5 × 26.5 cm) Interior Dimensions(L × W × D): 20.37 in × 15.43 in × 9 in(51.7 × 39.2 × 22.9 cm) |
| Shipping weight | 9.07 kg |
| Package size | 560 × 455 × 265 mm |
Questions about this item
How often should the O-ring seal and automatic pressure equalization valve be checked or replaced?
Inspect the O-ring seal before each trip and clean it if grit is present; replace it when it shows cracks or permanent deformation. The automatic pressure equalization valve is maintenance-free for the life of the case.
What load limit appears first when the 1560 is rolled fully loaded over rough ground day after day?
The polyurethane wheels with stainless steel bearings and the retractable extension handle are the first components to show wear under continuous heavy rolling; the case is rated for 115 lbs of buoyancy, so stay well below that weight when moving it.
Does the case interior exceed the 40 to 210 °F operating range if left in a hot vehicle all day?
The case is rated for -40 to 210 °F (-40 to 99 °C); a closed vehicle in direct sun can surpass 210 °F, so avoid leaving the sealed case in that environment for extended periods.
More in Camera Bags & Protective Cases
Similar items
BlackRapid 361016 Blackline II Double Camera Harness
- Digital Camera Acce…





