We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey high-voltage oscilloscope probe, long cylindrical body with BNC connector

Pintech

Pintech P6018A 1000:1 100MHz 18kV DC 12kV AC measurement tool

SKU CH-MM35-S656J MPN P6018A

High-voltage oscilloscope probe with 1000:1 attenuation, 100 MHz bandwidth, 18 kV DC and 12 kV AC rating, BNC connector, CE certified

  • Measurement accuracy=3%
  • Certifications and standardsCE
  • Size or dimensions80 × 80 × 320 mm
  • Sold asEach
  • Product typeElectrical Testing & Measuring
  • Measures up to 18 kV DC and 12 kV AC for high-voltage signal testing
  • 1000:1 attenuation reduces voltage at the oscilloscope input for safer operation
  • 100 MHz bandwidth with 3.5 ns rise time captures fast transients accurately
  • Standard BNC connector fits any oscilloscope without adapters
  • Compact 80 × 80 × 320 mm design weighs 460 g for portable bench or field use

High-Voltage Oscilloscope Probe

The Pintech P6018A is a new high-voltage probe designed for oscilloscope measurements up to 18 kV DC or 12 kV AC RMS. It provides a 1000:1 attenuation rate and 100 MHz bandwidth for safe signal capture. The probe connects via a standard BNC interface.

Suited for High-Voltage Signal Analysis

This probe suits engineers and technicians measuring high-voltage DC or AC signals within the stated limits. It is not for users needing higher voltage handling, greater bandwidth, or a different attenuation ratio. Buyers requiring CAT safety ratings should verify suitability separately.

1000:1 Attenuation Defines Safe Range

The 1000:1 attenuation ratio reduces the input signal so the oscilloscope sees a safe, measurable level. This single specification determines the maximum voltage the probe can handle and the sensitivity required from the scope. Match this ratio to your instrument's input range.

How it compares

Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.

Price $752.99
Pricier than about 91% of the 3,030 comparable items (median $54.99).

Specifications

Product
Brand namePINTECH
Model nameP6018A
Product typeElectrical Testing & Measuring
Performance
Measurement accuracy=3%
Size & build
Size or dimensions80 × 80 × 320 mm
Environment & compliance
Certifications and standardsCE

Questions about this item

How much noise does the P6018A add to the signal when it runs continuously?

The probe specifies a noise figure better than 60 dB at 1 kHz and better than 50 dB at 1 MHz, so added noise remains low during extended use.

What oscilloscope input must I already have for the P6018A to connect?

A standard BNC input on the oscilloscope is required; the probe ships with a BNC connector for direct attachment.

Will the P6018A load down vintage scopes with 1 MΩ inputs?

Its 200 MΩ input impedance and 1.7 pF capacitance present a very light load, so older 1 MΩ scopes see minimal additional loading.

More in Meters, Testers & Measuring Tools

Similar items