Pioneer TS-D10LS4 10" 1300W 4-ohm Shallow Subwoofer
A 10" shallow-mount subwoofer delivering 1300W max power from a 3.3" depth for tight vehicle spaces
- Product typeSubwoofer
- Key features1300 W Max / 350 W RMS power handling for powerful bass
- 1300W max power delivers powerful bass
- 3-inch shallow depth fits tight vehicle spaces
- Aramid Fiber IMPP cone ensures accurate sound reproduction
- Single 4-ohm voice coil simplifies amplifier matching
- 20 Hz to 3.4 kHz range covers deep low frequencies
Compact Bass for Tight Spaces
The Pioneer TS-D10LS4 is a 10-inch shallow-mount subwoofer built for vehicles where installation depth is limited. Its 3.3-inch mounting profile allows it to fit behind seats or in slim enclosures while still delivering 1300W maximum and 350W RMS power handling. The single 4-ohm voice coil simplifies wiring for a wide range of amplifiers.
Sustained Output and Cone Control
Under continuous demand the Aramid Fiber Interlaced IMPP cone and butyl rubber surround with dual Meta-Aramid fiber spider keep distortion low and motion linear. The 8 mm Xmax and 37 Hz free-air resonance support deep, controlled bass down to 20 Hz without bottoming out. Sensitivity of 76 dB means the subwoofer converts amplifier power into sound efficiently during extended listening sessions.
Upgrade Path From Factory Systems
This unit replaces thin, under-powered factory woofers that cannot reach 20 Hz or handle 350W RMS. The jump is worth it when you need authoritative low-frequency impact in a sealed enclosure of 0.6 cu. ft. but lack the depth for a standard subwoofer. Buyers who require higher sensitivity or greater excursion for ported designs should consider other models.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $132.99
- Pricier than about 90% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | Pioneer |
| Product type | Subwoofer |
Questions about this item
How much heat and power does the 350W RMS subwoofer draw when running all day?
The subwoofer handles 350W RMS continuous power. Its 76 dB sensitivity means it produces strong output with moderate amplifier demand, keeping thermal load manageable during extended use.
What amplifier and enclosure does the single 4-ohm voice coil require to work?
You need an amplifier stable at 4 ohms that can deliver around 350W RMS. A sealed enclosure of 0.6 cu. ft. is recommended for proper operation and bass response.
Will the 3.3-inch mounting depth fit alongside my factory door speakers?
At 3.3 inches deep with a 9-inch cutout, the shallow design fits tight spaces where standard subwoofers cannot. It leaves room for existing speakers and avoids deep cavity modifications.
More in Tech Gadgets & Accessories





