MTX MB210SP Dual 10" Car Subwoofer Enclosure with Amp
- 10 in (25.4 cm)
- Textured black poly…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 10-inch 4-ohm car subwoofer handling 400 W RMS with a Twaron aramid and cellulose dual-layer cone for deep bass down to 20 Hz
The Pioneer TS-Z10LS4 is a 10-inch component subwoofer with a single 4-ohm voice coil. It handles 400 watts nominal power and 1300 watts peak power. The dual-layer cone uses Twaron aramid fibre and cellulose fibre. A butyl rubber surround and dual poly-cotton spider complete the motor assembly.
This unit suits installations wired for a 4-ohm amplifier load. It fits enclosures tuned to the supplied ported or sealed volume recommendations. Builders who need a dual voice coil for wiring flexibility or a different impedance should look at other models. Systems requiring a shallower mounting depth than 3-1/4 inches will not accommodate this driver.
The 4-ohm nominal impedance determines which amplifiers can drive the subwoofer safely. The voice coil configuration is fixed at single 4-ohm. Sensitivity is rated at 76 dB at 1 watt and 1 metre. Free-air resonance sits at 35 Hz with a linear excursion of 9.5 mm.
Measured against everything we stock in Car Subwoofers & Enclosures, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Pioneer |
| Product type | Subwoofer |
This model is a single 4 Ohm voice coil rated at 400 W RMS and 1300 W peak, so select it when your amplifier can deliver its rated power into a 4 Ohm load.
The 1300 W peak rating shows short-term headroom; for continuous playback the subwoofer handles 400 W RMS, which determines real-world output and thermal limits.
At 4 Ohm nominal impedance the subwoofer presents a standard load, letting most mono car amplifiers deliver their full rated RMS power without wiring changes.
More in Car Subwoofers & Enclosures
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?