We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

PLANET

PLANET IGS-5225-8P2T2S 8-port PoE+ 2-port RJ45 2-port SFP managed network switch

SKU CH-1CJE-AQQ0M MPN IGS-5225-8P2T2S

Industrial managed switch with eight PoE+ Gigabit RJ45 ports, two extra Gigabit RJ45 ports and two SFP slots for fibre uplinks

  • Supported standardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX / 100BASE-FX IEEE
  • Management typeManaged
  • Main ports8 × 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
  • MAC table size8K
  • Switching modeStore and Forward
  • Jumbo frame support9 KB
  • Powers eight devices through PoE+ injector ports
  • Managed Layer 2+ features include VLAN, QoS, LACP
  • Dual DC power inputs support 48 to 56 volt operation
  • SFP slots accept 100 or 1000 megabit modules
  • Industrial temperature rating from minus 40 to 75 Celsius

Industrial PoE+ managed switch

The PLANET IGS-5225-8P2T2S is a Layer 2+ managed Ethernet switch built for industrial networks. It provides eight Gigabit RJ45 ports with IEEE 802.3at PoE+ injection plus two additional Gigabit RJ45 ports and two 100/1000BASE-X SFP slots for fibre uplinks. The unit operates from dual 48–56 V DC inputs and is rated for -40 to 75 °C environments.

DIN-rail mounting and console access

The switch mounts on a standard DIN rail and measures 5.98 x 2.83 x 4.21 inches, weighing 2.18 lbs. An RJ45 console port gives direct CLI access for initial configuration before the network is live. Common issues include forgetting that PoE+ output requires the DC source to exceed 51 V, and neglecting to enable the ERPS ring or Spanning Tree settings that prevent loops in redundant topologies.

Power budget and SFP compatibility check

Verify that your DC supply can deliver the 252.3 W maximum draw when all eight PoE+ ports are fully loaded. Confirm that any SFP transceivers you plan to use are 100/1000BASE-X compatible and support the required distance, as the slots auto-detect the module type. Ensure the cabinet or enclosure provides adequate airflow for the wide operating temperature range.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $422.99
Typical for this category: the median of 2,759 items is $482.99.

Specifications

Product
Brand namePLANET
Model nameIGS-5225-8P2T2S
Connectivity
Management typeManaged
MAC table size8K
Switching modeStore and Forward
VLAN capabilityYes
Jumbo frame support9 KB
SNMP supportYes
Port mirroring supportYes
Ports & slots
Main ports8 × 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 × 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
2 × 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
One RJ45 console interface for basic management and setup
Power
Power over EthernetYes
Size & build
Product dimensions5.98 in × 2.83 in × 4.21 in
Product weight2.18 lb (0.99 kg)
Shipping weight1.36 kg
Package size254 × 178 × 127 mm
Environment & compliance
Temperature rangeOperating Temperature: -40 to 75 degree Celsius
Storage Temperature: -40 to 85 degree Celsius
Humidity range5% - 95%, Non-condensing
More details
LACPYes
Indicator lightsSystem:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Ring (Green)
Ring Owner (Green)
DIDO (Red)
Per 10/100/1000T RJ45 PoE+ Ports:
PoE-in-Use (Orange)
LNK / ACT (Green)
Per SFP Interface:
100 LNK / ACT (Orange)
1000 LNK / ACT (Green)

Questions about this item

How can I confirm the IGS-5225-8P2T2S is operating correctly after installation?

Check the front-panel LEDs: green Power 1 and Power 2 show dual supply is active, the orange PoE-in-Use LEDs on the eight PoE+ ports confirm powered devices are drawing current, and green LNK/ACT on every RJ45 and SFP slot verifies live links.

What ships with the switch and what must I source separately?

The unit includes the managed switch chassis, console cable for CLI access and mounting hardware; SFP transceivers for the two 100/1000X slots and a 48–56 V DC power supply (above 51 V for PoE+ budget) are not included.

Which SFP module speed should I choose for the two mini-GBIC slots?

The slots auto-detect 100 Mbps or 1 Gbps SFP modules; select 100BASE-FX optics for legacy fibre runs or 1000BASE-SX/LX for gigabit uplinks depending on the distance and fibre type you are deploying.

More in Ethernet & PoE Switches

Similar items