We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Shielded Cat6A flex connector, 90° down 45° up, tool-less, 9.0 mm cable entry

Platinum Tools

Platinum Tools Cat6A Flex Connector Shielded 90° Down 45° Up 10G PoE+ 26-22 AWG 9.0mm

SKU CH-FMP3-06RT1

A shielded Cat6A connector that flexes 90° down and 45° up for tight spaces, terminating 26-22 AWG solid or stranded cable up to 9.0 mm without tools, rated to 10 Gbps and PoE+

  • Tool-less termination speeds up Cat6A and Cat7 installs
  • 90° down and 45° up flex eases tight-space routing
  • 10-Gigabit certified and 1 GHz rated for high-speed links
  • PoE+ rated to carry power and data together
  • Fits 26-22 AWG solid or stranded conductors up to 9.0 mm

Cat6A Flex Connector 90° Down 45° Up

This shielded connector simplifies Cat6A and Cat7 terminations with a patented tool-less design. It accepts solid or stranded conductors from 26 to 22 AWG and cables up to 9.0 mm diameter. The flexible body bends 90 degrees down and 45 degrees up for tight routing. It is rated for 10-Gigabit performance and PoE+ applications.

Thermals Noise Power

As a passive networking component, this connector generates no heat, noise or power draw during normal operation. It requires no external power source and adds no thermal load to the installation. Performance relies solely on the quality of the cable termination and the connected equipment.

10-Gigabit Certified 1GHz Rating

The connector is frequency rated up to 1 GHz and certified for 10-Gigabit Ethernet speeds. This specification determines suitability for high-bandwidth networks requiring Cat6A or Cat7 performance. It is not intended for applications exceeding the 10-Gigabit standard or for use with cable diameters larger than 9.0 mm.

How it compares

Measured against everything we stock in Network Cabling Accessories, at today’s prices. Recalculated every night.

Price $17.99
Typical for this category: the median of 800 items is $18.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Cat6A Flex Connector and what step is often missed?

Strip the cable, insert conductors into the colour-coded guide, then press the connector together with parallel-jaw pliers; the step most often missed is fully seating the cable jacket past the strain-relief tab before crimping.

What maintenance or replacement will the connector need later?

No scheduled maintenance is required; replace the connector only if the cable is damaged, the shielding tabs are bent, or a re-termination is needed after a link failure.

What limit appears first under sustained 10 Gbps PoE+ load?

The 1 GHz frequency rating and 10 Gigabit certification define the performance ceiling; sustained use stays within spec as long as cable length and bend radius remain within Cat6A/7 limits.

More in Network Cabling Accessories

Similar items