POWER FIRST 3-Channel Cable Protector 36 in 18 in 225
Three-channel polyurethane cable protector handles 10,000 lb axle loads across 36 in length
- Product typeCable Management & Conduit
- Three channels route power and data cables together
- 10,000 lb per axle load capacity supports heavy vehicles
- Hinged polyurethane cover opens for fast lay-in installation
- 36 in length spans wide doorways and aisles
- RoHS and SVHC compliant for regulated environments
POWER FIRST 3-Channel Cable Protector
The POWER FIRST 3-Channel Cable Protector is a heavy-duty polyurethane ramp designed to shield cables and hoses from vehicle traffic. It features three hinged channels with a gripper connection style for lay-in installation. The unit measures 36 in long by 18 in wide and stands 2 3/4 in tall.
Suits sites needing ADA-compliant routing
This protector suits temporary events, warehouses and construction zones where cables cross pedestrian and vehicle paths. The gray and yellow finish increases visibility. Buyers needing ADA-compliant ramped edges should look elsewhere, as this model is not ADA compliant. It also lacks modular interlocking ends for extended runs.
Handles 10,000 lb per axle loads
Each channel accepts cables up to 2 1/4 in diameter, providing ample room for power feeds and hose lines. The polyurethane construction supports 10,000 lb per axle, so it withstands cars, trucks and light industrial equipment. Heavier tracked vehicles or continuous high-volume traffic may exceed its structural headroom.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $306.99
- Pricier than about 90% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | POWER FIRST |
| Product type | Cable Management & Conduit |
Questions about this item
What surface must I already have to lay this 36 in long cable protector on?
Place it on any flat, stable surface such as concrete, asphalt or compacted gravel; the hinged polyurethane body rests directly on the ground and requires no additional mounting hardware.
Can I run a 2 1/4 in diameter hose through this protector while a 10,000 lb axle vehicle drives over it?
Yes, each of the three channels accepts up to 2 1/4 in diameter cable or hose and the unit is rated for 10,000 lb per axle loads.
How do I confirm the hinged lid stays closed after I lay in the cables?
Snap the gripper-style lid shut; the built-in latch engages with an audible click and holds the cover flush with the 2 3/4 in high body.
More in Electrical Enclosures & Cabinets
Similar items
Wiegmann N412202006C electrical box 20.0 in H x 20.0 in W x 6.0 in D
- Electrical Boxes
HOFFMAN A606NFSS electrical box 6.0 in H x 6.0 in W x 4.0 in D
- Traffic & Parking L…





