POWER FIRST ZORO SELECT 29FG31 Rocker Switch DPDT 6 Connections
A DPDT rocker switch with six quick-connect terminals rated for 20 A at 125 V and 250 V AC, IP40 sealed for generators and industrial machines
- Product typeIndustrial Electrical Controls & Automation
- DPDT on/on function gives two independent circuits
- 22 A at 127 V AC handles heavy generator loads
- 250 in quick-connect tabs speed up wiring
- IP40 rating protects internals from dust ingress
- cRUus listed for North American safety compliance
Industrial Rocker Switch for Generators
The ZORO SELECT 29FG31 is a DPDT rocker switch rated for 22 amps at 127 volts AC and 20 amps at 125 or 250 volts AC. It carries a 2 horsepower rating and an IP40 ingress protection rating. The unit is built for generators and industrial machines requiring a durable on/on control function.
Replaces Worn Switches in 0.870 by 1.160 Inch
This switch fits a rectangular mounting hole measuring 0.870 inches by 1.160 inches and uses 0.250 inch quick-connect tabs for wiring. It is a direct swap for failed units with the same footprint and connection style. The jump is worthwhile when the existing switch shows contact wear or housing damage that interrupts power delivery.
Sustained Operation from 32 to 149 Degrees F
The switch maintains its 22 amp AC rating across an operating temperature range of 32 to 149 degrees Fahrenheit. Contacts are rated for continuous duty at the listed voltages without a separate DC rating. The cRUus marking confirms compliance with the applicable safety standards for prolonged industrial use.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product type | Industrial Electrical Controls & Automation |
Questions about this item
What size mounting hole does the 29FG31 rocker switch require?
The switch fits a rectangular cut-out of 0.870 in by 1.160 in, so the panel must be drilled or punched to those exact dimensions for a secure snap-in fit.
Which terminals does the DPDT switch use and what is the common wiring mistake?
It has six 0.250 in quick-connect tabs; the error is crossing the two common terminals, which makes both poles toggle together instead of independently.
How often should the IP40-rated contacts be inspected in a generator application?
Check the contacts annually for carbon build-up or discoloration; the 20 A at 125 V AC rating stays reliable if the terminals remain clean and tight.
More in Electrical Enclosures & Cabinets
Similar items
Hubbell Incorporated RACO 7120 Electrical Box 12.5 cu in 2 Gangs Thermoplastic
- Electrical Boxes &…
Hubbell Incorporated RACO 692 3-Gang Masonry Electrical Box 47.8 cu in
- Electrical Boxes &…
Hubbell Incorporated RACO 262 Extension Ring 2 Gangs 43.0 cu in
- Electrical Boxes &…





