Projector Ceiling Mounts Direct, LLC. BENQ-MS3081-LAT-13 projector accessory

BenQ MS3081 Compatible Ceiling Mount

This ceiling mount is built specifically for the BenQ MS3081, MS504, MS504A, MS506, MS512H, MS514H and MS521P projector models. It uses a CNC-machined plate made from 6061-T6 aircraft aluminium to ensure a precise fit and proper heat clearance. The design leaves minimal coverage on the projector body while providing secure attachment for permanent installations. Installers receive all necessary hardware and detailed instructions for a straightforward setup.

Replaces Universal Mounts for Listed BenQ Models

Universal mounts often leave gaps or block vents on these specific projectors, so this dedicated plate solves alignment and thermal issues in one step. The telescoping extension adjusts the drop from 13 to 20 inches in one-inch increments, replacing fixed-length arms that cannot match the ceiling height. A lateral shift coupling adds 1-1/2 inches of side-to-side travel to centre the lens when the mounting surface is off-centre. The jump is worth it when the ceiling structure cannot be moved and the projector must line up perfectly with the screen.

Handles 360-Degree Rotation and Pitch Adjustment

The mount rotates a full 360 degrees and allows pitch and roll in any direction, giving installers complete freedom to aim the image without shims. It comfortably handles standard ceiling installations where the projector sits 13 to 20 inches below the surface and the mounting point is within 1-1/2 inches of the screen centreline. It runs out when the ceiling is a drop or false ceiling, as the hardware is not rated for that structure. Buyers needing a shorter drop, a longer extension, or a plate for any other projector model cannot use this unit.